供应德国PTL密度测试漏斗装置 ***60密度测试装置

¥88.00 1台起批
¥85.00 2台
¥83.00 ≥3台

参数

否是否进口
/产地
是加工定制

发货地广东深圳 15天内发货供货总量100台

深圳市奥德赛创精密仪器有限公司 4年: 进入店铺在线咨询

供应德国PTL塑料颗粒倒入漏斗能力 ISO6186塑料颗粒漏斗装置面议

供应德国PTL自然倾斜角测量仪 V36.61休止角测定仪面议

供应以色列激光功率计中等功率热传感器激光功率能量计 ¥83.00

供应Ophir功率/能量计功率传感器中等功率热传感器面议

Ophir功率能量计低功率热传感器中国代理商直销优惠面议

供应Ophir功率/能量计激光功率能量计中等功率热传感器 ¥83.00

产品详情

德国PTL密度测试漏斗装置 ***60密度测试装置

供应进口V32.02密度测试漏斗装置

PTL密度测试漏斗装置用以确定由粉末或颗粒组成的成型材料可以从一个***的漏斗倒入的表观密度

符合标准：*** 60 : 1977, EN *** 60 : 1999-05, DIN EN *** 60 : 2000-01

Standard Outfit:

funnel, inner 56 mm with taper to Φ33 mm, capacity approx. 200 ml, inside surface highly polished, drop bottom, with handle, stand including base plate, with adjustable holder for the funnel, measuring cylinder, inner diameter 45±5 mm, capacity 100±0,5 ml, inside surface highly polished, spikes for a reliable electrically conductive connection between the measuring cylinder and the base plate, bar with straight edges, for wiping.

Design: funnel, measuring cylinder, stand rod and drop bottom of corrosion resisting chromium-nickel steel, base plate and funnel holder of anodized aluminum,

Article No.: V 32.02

The apparent density is determined to check manufactured and delivered moulding material. Knowledge of this density is a precondition for the calculation of loading chamber volumes of processing machines as well as of containers for storage and transport.

The apparent density is the ratio of mass and occupied volume. According to nature, the volume and thus the density considerably depend on the manner of pouring. For this reason the testing method was standardized; the PTL Density Test Funnel Device exactly complies to the relevant standards. In addition to the Density Test Funnel Device a precision balance is needed for determination of the mass.

PTL Density Test Funnel Devices have an electrically conductive connection between the funnel and the measuring cylinder to ensure potential equalization in case of electrostatic charges.

A Density Test Funnel Device can only be used for moulding material that can be poured from a specified funnel, i. e. powdery, granular or several short-fiber moulding materials. For long-fiber and shred-like moulding material, the apparent density is to determine in accordance with ((DIN) EN) *** 61.

Information about such an Apparent Density Test Device V 33: on request

为您推荐