- 商品
- 详情
供应维鼎牌顶针式、容积式油排（油路分配器）WDP-12油排孔位多
- ¥40.00 10 - 29
- ¥36.00 30 - 99
- ¥30.00 ≥100
- 是加工定制
- WDP-12型号
- 锌合金材质
容积式油排系列：
分配器安装尺寸图
1安装螺丝M6，左右油管Φ6MM，出油口管Φ4MM（出油口可订装）
2建议使用润滑油（脂）黏度20-50CST
use M6 screw to set up , the left andright hole is 6MM(caliber )
The others are 4MM (caliber ) .can beorder .
The viscosity range of oil (grease ). can be order .
特点：
1每次流量固定供给润滑部位。
2不因打油时间长短，油品黏度而影响流量。
3系统加压时储油，卸压时注油，指示杆的连动可显示。
4流量大小可选配
5适合配有脱压装置之注油系统。
通用范围：生产于流量要求较严格的润滑部位。
Characteristic
1 every flux offers to lubricatingarea for certain
2 flux will not be influenced bypouring time and oil sensity .
3 when the system increase pressure,,it will reserve oil .
When the system remove pressure ,itwill pour oil ,both of the action will be showed by move ment ofindiccator .
4 the amount of flux can becooperated optionally.
5 itsuits oil pouring system withde-pressurized equipment .
Scope :
It used to lubricating area whichdemands strike flux
在线问
- 是
- WDP-12
- 锌合金
- 皆可
- 维鼎
- 固定
- 15KG
- 直径6.5mm
