马尔禄MARLOW棘轮式穿孔机CC104RW 浩驹工业 HJ 正品保障

¥210.00 1台起批
¥205.00 2 - 4
¥201.00 ≥5

参数

穿孔机产品特性
否是否进口
中国产地

发货地上海松江区 10天内发货供货总量999台

上海浩驹机械设备有限公司 9年: 进入店铺在线咨询

马尔禄MARLOW液压冲孔机CC104Ⅱ 浩驹工业 HJ 正品保障 ¥201.00

马尔禄MARLOW油压电缆切断工具CC32B ¥201.00

马尔禄MARLOW单回路油压铜铝排平弯工具CB150D ¥201.00

马尔禄MARLOW双回路油压铜铝排平立弯工具CB125D ¥201.00

马尔禄MARLOW双回路电动液压泵CTE25AD 浩驹工业HJ 正品保障 ¥201.00

马尔禄MARLOW单回路电动液压泵CTE25AS 浩驹工业HJ 正品保障 ¥201.00

产品详情

CC-104RW
棘轮式穿孔1/2~2"
穿孔以徒手活动板手操作,免油压帮浦、油压缸。
操作说明:
先用电钻3/8"(9.6mm) 冲孔即可让R-1配上1/2"上下的刀模,再套上棘轮式活动板手开始操作。
铁板厚度3.2mm不锈钢2.0mm以下。
新产品少刀型，所穿越的铁屑为两片。
不需油压泵浦与油压缸，可节省费用成本低。
孔径: 1/2"(22mm), 3/4"(27.5mm), 1"(34.3mm), 11/4"(43mm)
尺寸: 11/2"(49mm), 2"(60.8mm)
Ratchet type perforated 1/2~2"
Perforated to unarmed activities board hand operation, free of hydraulic pump, hydraulic cylinder.
Operating instructions:
The first electric drill of 3/8 "(9.6mm) can make the punching knife mold of R-1 with 1/2" from top to bottom, and then board ratchet wheel on the movable sleeve hand began to operate.
Thickness of 3.2mm stainless steel under 2.0mm.
The new product is little knife type, through the iron filings into two pieces.
Without the hydraulic pump and hydraulic cylinder, saving the cost of low cost.
Aperture: 1/2 "(22mm), 3/4 (27.5mm)," 1 "(34.3mm), 11/4 (43mm)"
Size: 11/2 "(49mm), 2" (60.8mm)