马尔禄CO400B单回路分体式液压钳浩驹工业HJ
¥222.00
马尔禄CO500B分离式液压六角压接工具浩驹工业HJ
¥222.00
马尔禄CO630A单回路分体式液压钳头浩驹工业HJ
¥222.00
马尔禄CO630B单回路分体式液压钳头浩驹工业HJ
¥222.00
马尔禄CO1000分体式压接工具浩驹工业HJ正品保障
¥222.00
CO-400A单回路分体式液压钳
钳口类型：O型
压接形式：点式
输出压力：17TON
压接范围：16-400mm2
附件：配备50-400模具
CO-400A点式压接钳的用途及特点：
1、适用于输配电室内室外工程，各种接续金具、架空地下电缆专业使用。
2、10KV-500KV高压电缆套管、线夹、裸端子、六角型压着，紧密不易脱落，导电良好。
CO-400A分离式点压钳推荐配合泵浦：
1、马尔禄单回路电动液压泵CTE-2***S；
2、MAL（马尔禄）手动液压泵CP-700；
3、marlow（马尔禄）脚踏液压泵CFP-800或CFP-800-1。
Jaw type: O type
Crimping mode: point type
The output pressure: 17TON
Crimp range: 16-400mm2
Annex: equipped with 50-400 mould
Application and features plier pressure CO-400A type:
1, suitable for transmission and distribution of indoor and outdoor engineering, all kinds of connection hardware overhead, underground cables for professional use.
2, 10KV-500KV high voltage cable sleeve, clamp, bare terminal, six angle crimping tight, not easy to fall off, good electrical conductivity.
The split CO-400A pressure point clamp recommended with pump:
1, Mar Lu single loop electric hydraulic pump CTE-2***S;
2, MAL (Ma Erlu) CP-700 manual hydraulic pump;
3, Marlow (Ma Erlu) pedal hydraulic pump CFP-800 or CFP-800-1.
在线问
