NIST 可追踪校准具有比同类产品具有更好的不确定度
10 mm 通光孔径衰减器设计已改进
可拆卸校准模块
波长范围为 200-1800 nm
可移动校准 OD3 衰减器
特征
质量的光电二极管
Plots of various photodiode characteristics
Newport 使用市面上质量的半导体探测器材料。可用的探头类型包括硅 (Si)、紫外增强的硅、锗和砷化铟镓 (InGaAs)。对于 200 - 400 nm 波长,选择 818-UV,但请注意,在衰减器打开时,400 - 1100 nm 的可测量功率级别低至 50 mW。Newport ***的校准工厂执行最严格的校准,进一步提高了我们的探测器的精度。
宽动态范围(具有可拆卸衰减器)
Typical spectral responsivity of Newport's low power detectors
884-xx 系列 OD3 衰减器(针对每个匹配的探头进行校准并一起运输)可将本公司探头的校准光学动态范围延长三十年。我们的衰减器设计提供高损伤阈值和光谱平坦度。通过与本公司正在使用的光电二极管相关联的低 NEP,实现了更宽的动态范围。对于小于 1 mW 的输入功率,本公司建议移除衰减器(200 - 400 nm 之间 818-UV/DB 为 0.1 mW),以化信噪比。该衰减器的通光孔径为 10.3 mm。
最严格的校准不确定性
818 系列包括一个使用 NIST 可追踪标准、在 Newport 光学探头校准工厂维护的高精度设备进行校准的全光谱响应校准。严格的校准设备和过程控制可实现业内最严格的校准不确定性。每个探头都附有校准数据,这些数据以电子形式存储在探测器的 EEPROM 中。每个产品都附带校准证书以及具有衰减器和没有衰减器情况下的实际校准曲线和数据。为了保持精度、***性能,Newport 建议每年对光电二极管探头进行校准。
兼容功率计型号
1936-R 和 2936-R ***台式功率计
1830-R 系列台式低功率光学计
1919-R ***手持式光功率计
843-R 系列经济型手持式激光功率计
841-PE-USB 单通道 USB 光功率计
请参阅 Newport 功率计和探头旧产品及兼容性来获取与此型号兼容的功率计的完整列表。
关于探测器接头的注意事项
818 系列探头带有可拆卸校准模块的 BNC 连接器。/DB 后缀表示 DB15 样式校准模块,该模块与 Newport 的当前功率计直接兼容。带有 /CM 后缀的型号(仅在购买时可离线使用)附带传统的 8 针 迷你 DIN 模块。BNC 连接器型号 818-xx 不再可用。购买 818-xx/DB 时,只需简单拆除校准模块。
校准模块
针对 818 系列光电二极管探头,当您只需订购校准模块时,请订购 818-SCAL-OPT,无需对探头重新校准。当您下订单时,请通知销售人员探头型号、所需校准模块类型及其序列号。此零件不可在线订购。
概览
The 818-IR/DB Germanium (Ge) Photodetector is supplied with a NIST traced calibration report that details individual detector responsivity measured with and without attenuator. Exclusive OD3 attenuator technology extends the calibrated optical dynamic range of our photodiode sensor heads by three decades. The serial numbers for the detector and the attenuator are matched to ensure NIST traceability. The 10 mm clear aperture with the cross hair will improve the detector alignment to the input optical beam more accurately and help avoid detector overfilling. This model includes a BNC/DB15 calibration module. The adapter contains the detector calibration data, model number, serial number and calibration date for seamless operation. Also available are a variety of accessories such as collimating lens assemblies, fiber optic adapters, and a bare fiber adapter, and a 1 inch optic holder. Note that Model 818-IR/CM is available offline only. Model 818-IR is no longer available.
Please refer to Newport Power Meter and Detector Legacy and Compatibility for a complete list of meters that are compatible with this model.
技术参数
探测器类型
Standard
感光尺寸
Ø3 mm
光谱范围
780 - 1800 nm
可测量功率
2.0 W (1830-R, 1918-R, 1936-R/2936-R), 1.3 W (843-R, 1919-R, 841-PE-USB)
可测量功率(无衰减器)
10 mW (1918-R, 1936-R/2936-R), 1.3 mW (843-R, 1919-R, 841-PE-USB)
功率密度
30 W/cm2
功率密度(无衰减器)
3 W/cm2
脉冲能量(有衰减器)
5 µJ
脉冲能量(无衰减器)
5 nJ
校准不确定度(无衰减器)
±2% @ 780-910nm, ±2% @ 911-1700nm, ±4%@1701-1800 nm
校准不确定度(带衰减器)
±5% @ 780-910nm, ±2% @ 911-1700nm, ±4% @ 1701-1800 nm
线性度
±0.5 %
均匀性
±2 %
材料
Germanium
上升时间
≤2 µs
衰减器
OD3, Detachable
端口类型
DB15
RoHS
Compliant
最小可检测功率
5 nW
通光孔径
10.3 mm
电缆长度
1.5 m