冠恒CS41H-16P DN32 供应大量库存不锈钢和铸钢材质疏水阀

¥197.00 3 - 14
¥194.00 ≥15

参数

冠恒品牌
CS41H-16P DN32型号
不锈钢材质

发货地浙江永嘉县 6天内发货供货总量392套

上海冠桓泵阀有限公司 9年: 进入店铺在线咨询

冠恒CS41H-16P DN40 自由式浮球式疏水阀蒸汽疏水阀 ¥95.00

冠恒CS41H-16P DN50 不锈钢自由浮球式蒸汽疏水阀 ¥96.00

冠恒CS41H-16P DN65 自由浮球式疏水阀蒸汽法兰疏水阀 ¥97.00

冠恒CS41H-16P DN80 浮球疏水阀不锈钢杆杠浮球疏水阀 ¥98.00

冠恒CS41H-16P DN100 蒸汽法兰自由浮球式疏水阀 ¥99.00

冠恒CS41H-16P DN125 不锈钢自由浮球式蒸汽疏水阀浮球蒸汽疏水器 ¥100.00

产品详情

所有阀门系列详情及报价请咨询电话：153-5622-5255

冠恒CS41H-16P DN32 供应大量库存不锈钢和铸钢材质疏水阀

产品实拍

产品特色

冠恒CS41H-16P DN32 供应大量库存不锈钢和铸钢材质疏水阀

Crown heng CS41H - 16 p DN32 supply a large number of inventory of stainless steel and cast steel material of the trap

浮球式蒸汽疏水阀产品说明

CS41H-16、CS41H-16C、CS41-25、CS41-40 型自由浮球式蒸汽疏水阀：法兰连接、浮球式结构形式，阀座密封面材料为 Cr13 系不锈钢，公称压力 PN16~PN40，阀体材料为铸铁（CS41H-16）、碳钢（CS41H-16C、CS41-25、CS41-40）的蒸汽疏水阀。用于蒸汽加热设备、蒸汽管网和凝结水回收系统，它能迅速、自动、连续地排除凝结水，有效地阻止蒸汽泄漏。

浮球式蒸汽疏水阀工作原理

自由浮球式蒸汽疏水阀利用浮力原理，浮球根据凝结水量的多少，随水位的变化而作升降，自动调节阀座孔的开度，连续排放凝结水，当凝结水停止进入时，浮球降的底部，回到关闭位置，排水停止，由于排水阀座孔总是在凝结水位以下，形成水封、水、气自然分离，达到无蒸汽泄漏。

浮球式蒸汽疏水阀产品特点

产品特点：①能拓饱和凝结水，回执设备内不含有水先积聚，从而获得的加热效率。②蒸汽压力变化时，不受影响，能连续工作性能稳定。③漏汽变幻无常小，采用***研磨工艺制造，浮球精度高，密封性能好。④自动排空气性能好。⑤寿命长，浮球的整个球面都可以做密封面，无集中磨损。

Ball float steam trap product description

CS41H - 16, CS41H - 16 c, 25, CS41 CS41 - - 40 free floating ball type steam trap: flange connection, the floating ball type structure, the valve seat sealing surface material for Cr13 stainless steel, nominal pressure PN16 ~ PN40, the valve body material is cast iron (CS41H - 16), carbon steel (CS41H - 16 c, 25, CS41 CS41 - - 40) of the steam trap. For steam heating equipment, steam pipe network, and the condensate recovery system, it can rapidly and automatically and continuously eliminate the condensate, effectively prevent leakage of steam.

The working principle of the ball float steam trap

Free ball float steam trap using the buoyancy principle, floating ball based on what the condensation water, along with the change of water level for lifting, automatically adjust the opening of the seat hole, continuous discharge condensate, when the water stop, float down to the bottom of the back to the closed position, drainage stops, the seat due to drainage hole is always below the condensation water, formation water, water, natural gas separation, to achieve no leakage of steam.

Ball float steam trap product features

Product features: (1) to Rio condensate saturation, receipt within the device does not contain water accumulation first, to get the highest heating efficiency. (2) steam pressure changes, is not affected, can work continuously stable performance. (3) steam leakage uncertainty is small, the use of advanced manufacturing grinding technology, high precision ball float, sealed performance is good. (4) the automatic air discharge performance is good. 5. Life is long, can be done the sealant, float the whole sphere of concentrated wear.

企业介绍