Application Areas: TECHNOMELT PA 6782 BLACK is used for molding applications. The product shows an improved UV stability and an excellent flexibility. Preparation: The surfaces of the substrate must be dry and free from oil, grease and dust. Application: Application Temperature : 200 to 240 °C Application System : Hotmelt application systems When bonding to a substrate with high thermal conductivity the use of a specific application temperature is required for good wetting. Do not heat the product above the specified application temperature range. When the product is not in use do not apply heat, this will degrade the quality of the product and in extreme cases cause carbonisation. The standby temperature for the product is 130°C, but not longer than 72 hours. TECHNOMELT PA 6782 BLACK may absorb moisture from the air. This will not be apparent in the solid form, but may cause bubbles on heating and could affect the bond quality. It is important, therefore, that containers are kept closed and sealed when not in use.