说明
Value
溶剂
Micromax™ 8250
Blend member or series
00X0L Series
流变性能
Value
单位
Viscosity
1500 - 2400[1]
P
[1]: Brookfield HAT, SC4-14/6R, @10rpm
应用技术
Value
单位
Mask mesh
250 - 325
Mask emulsion
0.394 - 0.591
mil
Drying time
10 - 15
min
Drying temperature
302
°F
建议薄膜厚度, dried
0.551 - 0.63
mil
Leveling time
5 - 10
min
电性能
Value
单位
表面电阻率
700 - 1000[2]
mOhm/sq
Hot Temperature Coefficient Resistance
≤400[3]
ppm/K
Cold Temperature Coefficient Resistance
≤400[4]
ppm/K
Electrostatic discharge, 5kV
-0.1 - 0.1[5]
(avgDeltaR)(%)
[2]: Micromax™ 0001L resistor uses 8sq resistor geometry to measure the resistivity and TCR. Unless otherwise noted, Micromax™ 00X0L resistors are printed on Micromax™ 5426 terminations at 14-16µm dried thickness, then fired in 30 minutes cycle with 850°C peak for 10 minutes.
[3]: Temperature Coefficient of Resistance from +25 to +125°C for Hot TCR. Micromax™ 0001L resistor uses 8sq resistor geometry to measure the resistivity and TCR.
[4]: Temperature Coefficient of Resistance from +25 to -55°C for Cold TCR. Micromax™ 0001L resistor uses 8sq resistor geometry to measure the resistivity and TCR.
[5]: Electrostatic discharge HBM using 150pF/1000Ω R/C network. Untrimmed resistors, 1.0mm x 1.0mm