- 商品
- 详情
LNP THERMOCOMP DX05474 阻燃
- ¥87.00 ≥25千克起批
参数
- 否是否进口
- 中国厂家(产地)
- DX05474牌号
广东 东莞
不限
产品详情
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS | |
|---|---|---|---|---|
| FLAME CHARACTERISTICS | 1) | |||
| UL Yellow Card Link | E121562-101280282 | - | - | |
| UL Yellow Card Link 2 | E121562-101283885 | - | - | |
| UL Recognized, 94-5VA Flame Class Rating | ≥2.5 | mm | UL 94 | |
| UL Recognized, 94V-0 Flame Class Rating | ≥1.5 | mm | UL 94 | |
| UV-light, water exposure/immersion | F2 | - | UL 746C | |
| MECHANICAL | 2) | |||
| Tensile Stress, yield | 59 | MPa | ASTM D638 | |
| Tensile Stress, break | 54 | MPa | ASTM D638 | |
| Tensile Strain, yield | 4.9 | % | ASTM D638 | |
| Tensile Strain, break | 8.2 | % | ASTM D638 | |
| Tensile Modulus, 50 mm/min | 3590 | MPa | ASTM D638 | |
| Flexural Stress | 103 | MPa | ASTM D790 | |
| Flexural Modulus | 3610 | MPa | ASTM D790 | |
| IMPACT | 2) | |||
| Izod Impact, unnotched, 23°C | 1068 | J/m | ASTM D4812 | |
| Izod Impact, notched, 23°C | 58 | J/m | ASTM D256 | |
| THERMAL | 2) | |||
| HDT, 1.82 MPa, 3.2mm, unannealed | 132 | °C | ASTM D648 | |
| Relative Temp Index, Elec | 1) | 125 | °C | UL 746B |
| Relative Temp Index, Mech w/impact | 1) | 115 | °C | UL 746B |
| Relative Temp Index, Mech w/o impact | 1) | 125 | °C | UL 746B |
| PHYSICAL | 2) | |||
| Density | 1.29 | g/cm³ | ASTM D792 | |
| Mold Shrinkage, flow, 24 hrs | 4) | 0.3-0.4 | % | ASTM D955 |
| Mold Shrinkage, xflow, 24 hrs | 4) | 0.3-0.5 | % | ASTM D955 |
| ELECTRICAL | 2) | |||
| Comparative Tracking Index (UL) {PLC} | 4 | PLC Code | UL 746A | |
| Hot-Wire Ignition (HWI), PLC 1 | ≥3 | mm | UL 746A | |
| Hot-Wire Ignition (HWI), PLC 2 | ≥1.5 | mm | UL 746A | |
| High Amp Arc Ignition (HAI), PLC 3 | ≥1.5 | mm | UL 746A | |
| High Voltage Arc Track Rate {PLC} | 3 | PLC Code | UL 746A | |
| Arc Resistance, Tungsten {PLC} | 6 | PLC Code | ASTM D495 | |
| INJECTION MOLDING | 3) | |||
| Drying Temperature | 120 | °C | ||
| Drying Time | 4 | Hrs | ||
| Maximum Moisture Content | 0.02 | % | ||
| Melt Temperature | 305-325 | °C | ||
| Front - Zone 3 Temperature | 320-330 | °C | ||
| Middle - Zone 2 Temperature | 310-320 | °C | ||
| Rear - Zone 1 Temperature | 295-305 | °C | ||
| Mold Temperature | 80-110 | °C | ||
| Back Pressure | 0.2-0.3 | MPa | ||
| Screw Speed | 30-60 | rpm |
为您推荐
在线问
产品参数
- 否
- 中国
- DX05474
- 注塑
