瑞士西卡防水密封粘接材料界面剂SIKADUR32
¥100.00
- 商品
- 详情
参数
- 防水产品特性
- 否是否进口
- 上海产地
辽宁 沈阳
2天内发货
100000
瑞士西卡防水密封粘接材料界面剂SIKADUR32
¥100.00
产品详情
Sika® Injection-101 西卡双组分发泡聚氨酯注浆料
PRODUCT DATA SHEET Sika® Injection-101 FLEXIBLE PUR-INJECTION FOAM FOR TEMPORARY WATERSTOPPING DESCRIPTION Sika® Injection-101 is a low viscous, fast foaming and solvent-free water-reactive polyurethane injection foam resin, which cures to a dense flexible foam with a fine cellular structure. USES Sika® Injection-101 may only be used by experienced professionals. Sika® Injection-101 is used for the temporary waterstopping of high water intrusions in cracks, joints and cavities in concrete, brickwork and natural stonework. ▪ To achieve permanent watertight crack sealing, Sika® Injection-201 BR should be injected subsequently. ▪ CHARACTERISTICS / ADVANTAGES No reaction takes place unless it is in direct contact with water. ▪ Sika® Injection-101 can be injected as a single component system. ▪ The free foaming expansion in contact with water is up to 40 times. ▪ The reaction speed (foam formation) is influenced by the temperatures of the mixed material, the structure and the contact water, plus the hydrodynamic conditions. ▪ PRODUCT INFORMATION Composition Water reactive 2-part polyurethane resin, solvent and CFC free Packaging Part A 10 kg Part B 11,66 kg Colour Part A Colourless Part B Brown Shelf life Storage conditions 12 months shelf life from date of production if stored properly in undamaged, unopened, original sealed packaging. Dry storage at temperatures from +5 °C up to +35 °C. Protect from direct sunlight and humidity. Density Part A ~ 1,06 kg/l (20°C) Part B ~ 1,23 kg/l (20°C) Viscosity Part A ~ 283 mPa.s (20°C) Part B ~ 320 mPa.s (20°C) PRODUCT DATA SHEET Sika® Injection-101 January 2017, Version 01.0 020707010010000036 TEMPLATE FOR TRANSLATION. ONLY FOR INTERNAL USE. 1 / 3Expansion Expansion Start ~ 16 s after contact with water (20°C) Expansion End ~ 70 s (20°C) Mixing Ratio Part A:Part B = 1:1 by volume Ambient Air Temperature +5 °C min. / +35 °C max. Substrate Temperature +5 °C min. / +35 °C max. MIXING Empty parts A and B into a mixing vessel and mix slowly and thoroughly for at least 30 s (max. 250 rpm) until homogeneous, thereby observing the safety precautions. The containers are supplied according to the required mixing ratio of 1 : 1 parts by volume. Partial quantities can be measured out in separate vessels. After mixing, pour the material into the pump’s feed container, stir briefly and apply within the pot life. After mixing, pour the material into the pump’s feed container, stir briefly and use within the pot life. APPLICATION METHOD / TOOLS Use injection pumps suitable for single part injection products. CLEANING OF EQUIPMENT Clean all tools and application equipment according to the Product Data Sheet for the Sika®Injection Cleaning System. IMPORTANT CONSIDERATIONS Sika® Injection-101 is generally used for the temporary stopping of high water infiltration. To achieve permanent watertight crack sealing, the subsequent injection of Sika® Injection-201 BR is recommended BASIS OF PRODUCT DATA All technical data stated in this Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control. LOCAL RESTRICTIONS Note that as a result of specific local regulations the declared data and recommended uses for this product may vary from country to country. Consult the local Product Data Sheet for the exact product data and uses. ECOLOGY, HEALTH AND SAFETY For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Safety Data Sheet (SDS) containing physical, ecological, toxicological and other safety-related data. LEGAL NOTES The information, and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sika&＃39;s current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika&＃39;s recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the product’s suitability for the intended application and purpose. Sika reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request. PRODUCT DATA SHEET Sika® Injection-101 January 2017, Version 01.0 2 / 3Sika Services AG Tüffenwies 16 8048 Zürich T
为您推荐
在线问
产品参数
- 防水
- 否
- 上海
- 西卡SIKA
- 双组分发泡聚氨酯注浆料
- Sika® Injection-101
