韩国sk TPEE G130D
¥1.00
韩国sk TPEE G175D
¥1.00
韩国sk TPEE G172D
¥1.00
韩国sk TPEE G168D
¥1.00
韩国sk TPEE G163D
¥1.00
SHINITE® S201NA
DH6000
TPEE Base polymer Grade / Nature
TPEE 一般級 / 本色
Unit Test Method Values
Mechanical properties 機械性質
Izod Impact(Notched) 衝擊強度Kg-cm/cm ASTM D256 NOT BREAK
Tensile Strength at Yield 降伏強度Kg/cm2 ASTM D638 219
Tensile Strength at Peak 拉伸強度Kg/cm2 ASTM D638 > 360
Nominal Tensile Strain at Break 拉伸率% ASTM D638 > 480
Flexural Strength 彎曲強度Kg/cm2 ASTM D790 180
Flexural Modulus 彎曲模數Kg/cm2 ASTM D790 3400
Hardness (Shore D) 蕭氏硬度- ASTM D2240 63
Thermal properties 熱 性 質
Heat Deflection Temperature 熱變形溫度ASTM D648
66psi °C -
264psi °C -
Flammability 防火性 - UL94 HB
Melting Point 熔點°C DSC 212
Melt Index 230°C/2.16Kg 熔融指數g/10min ASTM D1238 20
Electrical properties 電氣性質
Dielectric Strength 介電強度KV/MM ASTM D149 26
Dielectric Constant 介電常數… ASTM D150 -
Volume Resistivity 體積電阻Ω-CM ASTM D257 1.00E+16
Other properties 其它性質
Specific Gravity 比重 - ASTM D792 1.23
Water Absorption 吸水率% ASTM D570 0.5
Mold Shrinkage 成形收縮率ASTM D955
Flow 流動方向% 1.5
Cross Flow 垂直方向% 1.5
Injection Molding 成型條件
INJECTION MACHINE 成型機台OZ 3
DRYING 乾燥4-5 HR × 80 (℃)
BARREL TEMPERATURE 成型溫度°C
REAR 205-215
MIDDLE 215-225
FRONT 225-235
NOZZLE 235-245
MOLD TEMPERATURE 模溫°C 50-70
INJECTION PRESSURE 射出壓力kg/cm2 600-1000
INJECTION SPEED 射出速度- FAST
在线问
