NPC-1210-030G-1S表压30psi毫伏输出100mV压力传感器Amphenol

¥200.00 100 - 999
¥150.00 ≥1000

参数

压力传感器产品特性
Amphenol Nova sensor品牌
NPC-1210-030G-1S型号

发货地广东深圳 3天内发货供货总量5000PCS

深圳盛思瑞创科技有限公司 3年: 进入店铺在线咨询

NPC-1210-100G-1-S反向引脚表压100psi毫伏压力传感器Amphenol ¥150.00

NPC-1210-015G-3S固态PCB表压15psi毫伏压力传感器Amphenol ¥150.00

NPC-1210-015A-1L恒流激励绝压15psi毫伏压力传感器Amphenol ¥150.00

NPC-1210-050D-3L电流1.5mA差压50psi毫伏压力传感器Amphenol ¥150.00

NPC-1210-10WG-3L长管表压0-2.5Kpa毫伏压力传感器Amphenol ¥150.00

NPC-1210-015G-3-N无管表压0-15psi毫伏压力传感器Amphenol ¥150.00

产品详情

NovaSensor NPC-1210 Series | Low/Medium Pressure Sensors

The NovaSensor NPC-1210 Series of Low/Medium Pressure Sensors provides a cost effective solution for applications that require calibrated performance over a wide temperature range. Packaged in a dual-in-line configuration, the NPC-1210 Series is intended for printed circuit board mounting. Optional pressure port and lead configurations provide superior flexibility in low profile applications where pressure connection orientation is critical.

The NPC-1210 series is based on NovaSensor’s advanced SenStable® piezoresistive sensing technology. Silicon micromachining techniques are used to ion implant piezoresistive strain gages into a Wheatstone bridge configuration. The NPC-1210 Series offers the added advantage of superior temperature performance over the temperature compensated range of 0°C to 60°C (32°F to 140°F). A gain set resistor is included to normalize the FSO for field interchangeability.

Applications

Industrial automation

Air flow monitors

Process control

Medical equipment

Underground cable leak detection

Ventilation

Respirator monitoring

NPC-1210低压系列固态压力传感器的设计达到与其他压力量程一样的成本效率。NPC-1210的双列直插式封装使它可以直接安装在PCB（印刷电路板）上。可选择的压力接口和引脚结构提供了灵活性，尤其是在压力连接方向要求严格的应用中。

NPC-1210系列是基于NovaSensor®的SenTable®硅压阻传感技术。硅微机械加工技术被用来将硅阻应变通过离子注入形成所需惠斯通电桥结构。NPC-1210具有温度特性，温度补偿范围为0~60℃。它将一个增益设置电阻集成在传感器内，使传感器可以互换。

NPC-1210系列的压力量程有0~5英寸水柱、0~10英寸水柱、0~1psi、0~5psi、0~15psi、0~30psi、0~50psi、0~100psi、。

应用

工业自动化
气流监测仪
过程控制
医疗仪器
地下电缆泄漏检测
通风
呼吸器监测

特征

灵敏度

通用
温度补偿：0°C 至 60°C（32°F 至 140°F）
可安装在 CB 上的封装
双列直插式封装（DIP）
固态可靠性
单个设备可追溯性

规格

Pressure Ranges	Medium Pressure Sensors	Low Pressure Sensors
Gauge and Differential:	5 psi (34 kPa, 0.34 bar) 15 psi (100 kPa, 1.0 bar) 30 psi (210 kPa, 2.1 bar) 50 psi (340 kPa, 3.4 bar) 100 psi (690 kPa, 6.9 bar)	10 in H20 (2.5 kPa, 0.025 bar) 1 psi (6.9 kPa, 0.069 bar)
Absolute:	15 psi (100 kPa, 1.0 bar) 30 psi (210 kPa, 2.1 bar) 50 psi (340 kPa, 3.4 bar) 100 psi (690 kPa, 6.9 bar)
*For other pressure ranges, please contact NovaSensor.

Parameter	Medium Pressure Sensors	Low Pressure Sensors
Operating Temperature Range	-40°C to 125°C (-40°F to 257°F)	-40°C to 125°C (-40°F to 257°F)
Compensated Temperature Range	0°C to 60°C (32°F to 140°F)	0°C to 60°C (32°F to 140°F)
Storage Temperature Range	-55°C to 150°C (-67°F to 302°F)	-55°C to 150°C (-67°F to 302°F)
Weight	2.5 g (0.005lb)	2.5 g (0.005lb)
Media Compatibility	Compatible with exposed materials7	Compatible with exposed materials7
Positive Differential and Gauge Ports	Dry gases only	Dry gases only
Absolute and Negative Differential Ports	Dry gases only	Dry gases only

Performance Parameter1	Units	Minimum	Typical	Maximum	Notes
FS Output (FSO)	mV	75	100	150	2, 3
Zero Pressure Output	mV	-2	—	2	3
Linearity	%FSO	-0.1	—	0.1	4, 8
Pressure Hysteresis	%FSO	-0.1	—	0.1
Input Impedance	Ω	2500	4000	6000
Output Impedance	Ω	4000	5000	6000
Thermal Accuracy–Span	%FSO	-0.5	—	0.5	3, 5, 8
Thermal Accuracy–Zero	%FSO	-0.5	—	0.5	3, 5, 8
Temperature Coefficient– Resistance	%/°C	—	0.2	—	5
Thermal Hysteresis–Zero	%FSO	—	0.1	—	5
Input Excitation	mA	—	1.5	2
Pressure Overload	Rated	—	—	3X	6, 9
Supply current = 1.5 mA and ambient temperature = 77°F (25°C), unless otherwise noted. Gauge and differential pressure devices are calibrated by applying pressure to the positive differential port (P2) and venting to atmosphere the reference port (P1). Output span of unamplified sensor. Compensation resistors are an integral part of the sensor package; no additional external resistors are required. Pins 7 and 8 must be kept open. The NPC-1210 is interchangeable only when used with the gain set resistor shown in the schematic diagram. Maximum gain-set resistor mismatch is 2%. Best fit straight line. Temperature Range: 32°F to 140°F (0°C to 60°C), reference to 77°F (25°C). 3X or 200 psi (13.78 bar) maximum, whichever is less. Exposed materials are pyrex, ceramic, silicon, epoxy, RTV, and stainless steel. 5 psi (0.34 bar) spec.: Linearity: 0.25 ±%FSO, TC-span: 0.75 ±%FSO, TC-zero: 0.75 ±%FSO. otherwise noted. Port 1 is limited to 60 PSIG for differential and absolute pressure sensors. Contact factory for 50 PSIA/D and 100 PSIA/D units.

Medium Pressure Sensors
NPC-1210	Code	Pressure Range	Code	Type	Code	Lead Configurations	Code	Tube Options
	005 015 30 050 100	5 psi (34 kPa, 0.34 bar) 15 psi (100 kPa, 1.0 bar) 30 psi (210 kPa, 2.1 bar) 50 psi (340 kPa, 3.4 bar) 100 psi (690 kPa, 6.9 bar)	D A G	Differential Absolute Gauge	1 3	Up Down	L S N	Long Short None*
Example: NPC-1210	-005		-D		-1		-L
*Order NPC-1210-XXXG-XN in place of NPC-1210-XXXD-XN.

Low Pressure Sensors
NPC-1210	Code	Pressure Range	Code	Type	Code	Lead Configurations	Code	Tube Options
	10W 001	10 in H2O (25 mbar) 1 psi (69 mbar)	D G	Differential Gauge	1 3	Up Down	L S	Long Short
Example: NPC-1210	-005		-D