“K5” adjustable pressure switches activate a microswitch once preset value is reached. The pressure is set by rotating a graduated knob or, for the economical version, by a setscrew located on top of the unit. Both systems are supplied with a device permits locking the desired set pressure. Mechanical stops protect both the spring and the microswitch from over pressurization. Technical Features: Body : square 40x40mm in anodized aluminium Assembly: in every position with ¼”BSPF threaded port or Cetop flanged without needs adaptors Working temperature: from - 20°C to + 80°C Switching frequency: 120 cycles/min Switching accuracy: ±2% of the end of scale to 20°C Fixed hysteresis value: ~ 15% of the end of scale at 20°C Weight: 0,35 Kg Mechanical life: 106 cycles at 70 bar at 20°C Electric Features: - Maximum load: 5 Ampère at 250 Volt AC 0.25 Ampère at 250 Volt DC (see dedicated page) - Exchange contact NO and NC - Electric connection according to DIN 43650 - Electric protection according to DIN 40050:IP65 Warranty: see dedicated page Spare parts: see dedicated page Also available : - Seal in Viton - Microswitch with gold plated contact - Cetop modular manifold type “B6” and “B10” for attachment to electrovalves Cetop 3 and 5 (see adapters page) - Electric connector M4 with light signal of insertion - Connector M12 according to IEC60947-5-2