公共场所母婴室哺乳间***新生婴儿更换尿布台床考拉KB112-01RE
¥2800.00
- 商品
- 详情
KoalaKare考拉 台面式婴儿护理台 BOBRICK护理台 KB112-01RE 现货
- ¥3800.00 ≥1件起批
参数
- 婴儿护理台产品类别
- KoalaKare考拉品牌
- PP材质
上海 青浦区
2天内发货
99件
公共场所母婴室哺乳间***新生婴儿更换尿布台床考拉KB112-01RE
¥2800.00
产品详情
Koala Kare品牌 KB112-01RE 台面式婴儿护理台 现货
KB112-01RE婴儿护理台
材料:
FDA批准高密度聚乙烯(琉璃)。
安装说明和硬件包括在内。在六种语言图形和安全信息。波状外形的改变表面积是379平方。(2445平方厘米)，配有尼龙安全肩带。
操作:
在卫生间使用柜台空间比墙更丰富的空间。高浓度 聚乙烯没有尖角,易于清洁和抗拒的气味和细菌生长。
产地：美国
MATERIALS:
FDA approved thermoformed high-density polyethylene. Mounting instructions and hardware
included. Contoured changing surface is 379 sq. in (2445 sq. cm) and comes complete with nylon
safety straps.
OPERATION:
For use in restrooms where counter space is more abundant than wall space. High-density
polyethylene has no sharp corners, is easy to clean and resists odors and bacterial growth.
Warning: To ensure that the unit supports the intended loads, baby changing stations must be
properly installed according to the manufacturer’s instructions.
SPECIFICATION:
Baby changing station shall be durable, high impact polyethylene body. Design of unit shall be
counter recessed mounted. Bed shall have smooth concave changing area with a nylon safety strap
and universal instruction graphics. Unit shall be backed by manufacturer’s 5-year limited warranty on
materials and workmanship and include a provision for replacement caused by vandalism. Unit shall
be manufactured in the U.S.A.
INSTALLATION:
To ensure proper installation and compliance to building codes, it is recommended that a qualified
person or carpenter perform the installation of the unit.
Drilling Holes and Mounting the Station
1. Remove the station from the shipping container and check
for any freight damage.
2. Remove the rough opening template from the shipping
carton. Seperate the oval template from the cardboard
sheet. Use template to trace rough opeining to allow saw
access. Cut out rough opening.
3. Construct under counter support as shown in the
illustration. Support should be 3” below bottom of mounting
surface.
4. Place unit onto counter surface in desired position. Using
the unit’s mounting holes as a guide, mark the screw hole
locations with a pencil. Remove unit and drill holes with
a 5/32” (3.97 mm) diameter drill bit. Drill down ¾” (19.05
mm) deep. Place the unit onto counter surface using the
drilled holes as a guide. Screw fasteners through holes
into countertop surface. Apply a suitable water sealant (not
provided) such as silicone around the base of the unit.
5. Fill the built-in dispenser with sanitary bed liners.
Replacement parts and additional liners can be purchased
from your local distributor or by calling toll free 888.733.3456 or 303.539.8300 in the U.S.A.
Caution: Drill carefully through ceramic tile and other hard counter top materials.
为您推荐
更多 >
-
koala kare考拉KB112-01RE洗手台面安装嵌入式婴儿尿布台 ¥2500.00
-
在线问
产品参数
- 婴儿护理台
- KoalaKare考拉
- PP
- KB112-01RE
- KB112-01RE
- 灰白
- 美国
