PET/PBT成核剂TegMeR 809

¥1.00 ≥200千克起批

参数

TegMeR 809型号
99有效物质含量
在PET中TegMeR 809作为成核剂，降低塑料的Tg允许更快和较低的温度下处理的用途

发货地辽宁沈阳 3天内发货供货总量10000千克

沈阳东方昊炅化工有限公司: 进入店铺在线咨询

供应耐高温增塑剂PARAPLEX G-40 ¥1.00

供应氟橡胶增塑剂PARAPLEX G-41 ¥0.99

供应耐油印刷胶辊增塑剂PLASTHALL P-7046 ¥1.00

供应抗紫外线抗迁出低挥发增塑剂PARAPLEX A-8000 ¥0.99

供应耐寒耐萃取三元乙丙橡胶增塑剂PLASTHALL 100 ¥1.00

供应耐低温耐极性萃取增塑剂PLASTHALL DOS ¥1.00

产品详情

产品名称：TegMeR®809

GLYCOL ESTER乙二醇酯

Description:说明：
TegMeR 809 is a PEG 400 ester plasticizer for high polarity elastomers and plastics. TegMeR 809是高极性橡胶和塑料的PEG 400酯增塑剂。This plasticizer has excellent compatibility in acrylic elastomers, VAMAC and HNBR.这种增塑剂丙烯酸酯弹性体，VAMAC和HNBR具有良好的兼容性。TegMeR 809 offers good resistance to water extraction and good low temperature properties. TegMeR 809提供了良好的抗水提取和良好的低温性能。In thermoplastics like PET, TegMeR 809 acts as a nucleating agent and lowers Tg of the plastic to allow for faster and lower temperature processing.在热塑性塑料，如PET，TegMeR 809作为成核剂，降低塑料的Tg允许更快和较低的温度下处理的。

Suggested Uses:使用建议：
Acrylic coatings, Adhesive and sealant, Automotive belts, Hose and tubing, PET applications, and Transmission seals丙烯酸涂料，粘合剂和密封胶，汽车皮带，软管和管道，PET的应用，变速箱密封件

Compatibility:兼容性：

Hydrogenated nitrile氢化丁腈

Nitrile丁腈

PET PET

Polyacrylate聚丙烯

Polystyrene聚苯乙烯

Polyurethane聚氨酯

Polyvinyl acetate聚醋酸乙烯酯

Typical Properties:典型属性：

Acid Value, mg KOH / g酸值，毫克KOH /克	0.5 0.5
Appearance外形	Clear清除
Color, Gardner加德纳颜色，	2 2
Moisture, %水分，％	0.05 0.05
Refractive Index, 25°C折光率，25°C	1.4524 1.4524
Specific Gravity, 25°C比重，25°C	1.020 1.020

Performance Properties:性能特性：

In Vamac VAMAC

Plasticizer, pphr增塑剂，pphr	25 25
Shore A Hardness邵尔A硬度	56 56
Tensile Strength, psi拉伸强度，psi	1400 1400
断裂伸长率断裂％	410 410
Percent Change by:***比变化：
Volatilization 1000 hrs - 150°C挥发1000小时- 150°C	-6.4 -6.4
ATF fluid, 1000hrs. ATF液，1000小时。	+11 +11
ATF fluid, 500 hrs. ATF液，500小时。	+9.8 +9.8