进口高温高压针型阀德国品牌《洛克/LOCKE》
¥1358.00
供应美标高压针型阀 美标高温高压针型阀
¥120.00
进口锻件高温高压针型阀 RFK品牌一体式焊接针型阀
¥610.00
莱恩进口高温高压针型阀
¥1450.00
进口高温高压针型阀牌子选择德国洛克《LOCKE》体积小重量轻
¥2250.00
进口高温高压针型阀产品报价-德国洛克 高品质
进口高温高压针型阀技术参数：
1、规格范围：DN6-DN25
2、温度范围：-40℃≈600℃
3、压力范围：PN700
4、阀体材质：SS304/SS316/WC6/WC9
5、连接方式：焊接式
6、适用范围：水、油品、蒸汽、气及某些腐蚀性液体
1. Specification range: dn6-dn25
2. Temperature range: - 40 ℃ ~ 600 ℃
3. Pressure range: pn700
4. Valve body material: SS304 / SS316 / wc6 / wc9
5. Connection mode: Welded
6. Scope of application: water, oil, steam, gas and some corrosive liquids
进口高温高压针型阀描述：
德国LOCKE洛克进口高温高压针型阀的阀芯就是一个很尖的圆锥体，好象针一样插入阀座，比其他类型的阀门能够耐受更大的压力，该阀的密封性良好，一般用于较小流量，较高压力的气体或液体（如蒸汽、油品）介质的密封。
高温高压针型阀入口密封按标准设置，可灵活更换的填料及软阀座从而延长其使用寿命。所有主要元件的原材料都是可追溯的。
The valve core of the high temperature and high pressure needle valve imported from Locke lock, Germany is a very sharp cone, which is inserted into the valve seat like a needle, and can withstand greater pressure than other types of valves. The valve has good sealing performance, and is generally used for sealing gas or liquid (such as steam and oil) medium with small flow and high pressure.
The inlet seal of high temperature and high pressure needle valve is set according to the standard, and the packing and soft seat can be replaced flexibly to prolong its service life. Raw materials of all major components are traceable.
进口高温高压针型阀结构特点：
1、高温高压针型阀是仪表测量管路系统中重要组成部分，主要有截止阀和球阀，其功用是作开启或切断管道通路用。
2、高温高压针型阀具有安装拆卸方便、连接紧固、有利于防火、防爆和耐压能力高、密封性能良好等优点，是电站、炼油、化工装置和仪表测量管路中的一种***连接方式的阀门。
3、高温高压针型阀的密封性良好，使用寿命长，即使密封面损坏后，也只需要更换易损零件，即可继续使用。
4、安装时应使介质的流向与阀体上的箭头方向一致。
5、本测量管路截止阀是德国LOCKE洛克公司在吸收德国、美国、日本、新加坡等国家近年来仪表阀门结构的基础上自行设计的，是目前应用最普遍的***阀门。
1. High temperature and high pressure needle valve is an important part of the instrument measuring pipeline system, mainly including stop valve and ball valve, whose function is to open or cut off the pipeline.
2. High temperature and high pressure needle valve has the advantages of convenient installation and disassembly, tight connection, fire protection, explosion-proof and high pressure resistance, and good sealing performance. It is an advanced connection mode valve in power station, oil refining, chemical plant and instrument measuring pipeline.
3. The high temperature and high pressure needle valve has good sealing performance and long service life. Even if the sealing surface is damaged, only the vulnerable parts need to be replaced to continue to use.
4. During installation, the flow direction of medium shall be consistent with the direction of arrow on the valve body.
5. This measuring pipeline stop valve is designed by Locke lock company in Germany, America, Japan, Singapore and other countries on the basis of instrument valve structure in recent years. It is the most widely used new generation valve.
在线问
