CAN-CR200德国ixxat进口can总线电气隔离中继器
¥3800.00
can总线电气隔离中继器4KV隔离CAN中继器德国ixxat
¥3800.00
canopen协议栈源代码下载CANopen协议开发包CIA认证cia301
¥48000.00
canopen协议栈源代码下载ixxxatCIA认证cia301
¥48000.00
canopen从站协议栈源代码ixxxatCIA认证cia301协议规范
¥48000.00
canopen主站协议栈源代码ixxxatCIA认证cia301协议规范
¥48000.00
can总线电气隔离中继器4KV隔离CAN-CR220德国ixxat进口
1.01.0067.44400CAN-CR220
1.01.0067.44300CAN-CR220
The CAN-CR220 is used for the galvanic ***lation of two segments of a CAN network and offers a very high galvanic ***lation of 4 kV, allowing it be utilized in medical applications. One special feature of the Repeater is the automatic recognition and separation of a defective segment from the rest of the network so that the remaining network can continue working. After elimination of the defect, the segment is switched into the network again.
The galvanic ***lation ***lates the CAN segments from each other as well as from the power supply.
The CAN-CR220 is tested according DIN/EN 50178 (DIN VDE 0160: 1988-05 and DIN VDE 0160/A1: 1989-04).
Technical Data
| Display | Transmit and defective segment (two duo LEDs), Power (one LED) |
CAN bus interface | *** 11898-2 with CAN choke. Two Sub-D9 connectors. CAN termination resistors are integrated (switchable). |
| Baudrate | Up to 888 kbps |
| Delay | 200 ns (corresponds ~40 m (~120ft.) bus length) |
| Power supply | 9-32 V DC, 1.5 W typ., through terminals |
| Galvanic ***lation | CAN 1, CAN 2 and power supply are galvanic ***lated against each other. ***lation voltage 1.01.0067.44400 - 2,5 kV AC / 1 Min. - 3,5 kV AC / 1 Sec. - 4,0 kV DC / 1 Sec. ***lation voltage 1.01.0067.44300 - 3,0 kV AC / 3 Min. - 3,75 kV AC / 1 Min. - 4,0 kV AC / 1 Sec. |
| Certification | CE, FCC |
| Temperature range | -20 ºC ... +70 ºC |
| Housing, size | Plastic enclosure, 22.5 x 100 x 115 mm |
Contents of delivery
- CAN-CR220, Quick reference
| 1.01.0067.44400 | CAN-CR220 |
| 1.01.0067.44300 | CAN-CR220 |
CAN-CR220用于CAN网络中两个部分的电气隔离，并提供了高达4kV的电隔离，以使它被利用在医学中的应用。中断器的一个特性是它可以将网络中有缺陷的一个区段与其它部分分隔开，从而使网络的其他部分可以继续工作。消除的缺陷之后，该段可以再次切换到网络中。
它的电气隔离功能既可以使CAN网段之间相互隔离，要可以实现供电隔离。
CAN-CR220 已经依据DIN/EN 50178(DIN VDE 0160: 1988-05 and DIN VDE 0160/A1: 1989-04)标准进行测试。
技术数据
| 显示器 | 传输与故障部分(两个duo LEDs), 电源(一个LED) |
CAN总线接口 | *** 11898-2 with CAN choke. Two Sub-D9 连接器. 集成CAN 终端电阻(可切换).集成主干总线。 |
| 波特率 | 888 kbps |
| 延时 | 200 ns (响应~40 m (~120ft.) 总线长度) |
| 电源 | 9-32 V DC, 1.5 W typ., 通过终端 |
| 电气隔离 | CAN 1, CAN 2与电源都相互电气隔离。 隔离电压1.01.0067.44400 - 2,5 kV AC / 1 Min. - 3,5 kV AC / 1 Sec. - 4,0 kV DC / 1 Sec. 隔离电压 1.01.0067.44300 - 3,0 kV AC / 3 Min. - 3,75 kV AC / 1 Min. - 4,0 kV AC / 1 Sec. |
| 认证 | CE, FCC |
| 温度范围 | -20 ºC ... +70 ºC |
| 外壳，尺寸 | 塑料, 22.5 x 100 x 115 mm |
提交的内容
- CAN-CR220, 快速参考手册
| 1.01.0067.44400 | CAN-CR220 |
| 1.01.0067.44300 | CAN-CR220 |
在线问
