canopen
¥48000.00
pc104总线转can总线接口卡PCAN-PC/104
¥2800.00
PCAN-USB德国peak公司生产IPEH-002021
¥2000.00
can转以太网网关
¥5300.00
J1587协议栈源代码ANSI C source code
¥8000.00
USB协议转SPI总线接口Aardvark I2C/SPI适配器
USB协议转SPI总线接口Aardvark I2C/SPI，usb转SPI，美国total phase品牌，SPI协议分析仪，功能强大，性能稳定
I2C接口转换器I2C转usb分析仪美国total phase公司
Aardvark I2C/SPI美国total phase公司TP240141
同时支持I2C转usb进行分析，SPI转usb分析仪
The versatile Beagle™ I2C/SPI Protocol Analyzer is the ideal tool for the embedded engineer who is developing an I2C, SPI, or MDIO based product. The Beagle analyzer provides a high performance bus monitoring solution in a small, portable package. Perfect for engineers in the field and in the lab.
Not sure which product is right for your needs? The Product Selector Guide provides a brief summary table of key features for each Total Phase product.
Detailed technical information about the Beagle I2C/SPI Protocol Analyzer can be found in the User Manual.
We also have a Quick Start Guide to help you get started.
† Actual SPI capture performance is dependent on CPU speed and SPI bus throughput. 24 MHz SPI capture has been tested for typical applications (e.g., captures of a few hundred SPI packets). Depending on user configuration, the maximum achievable capture throughput for continuous streaming applications may be less than 24 MHz.
‡ MDIO monitoring is available in the current versions of the API and version 2.20 of Data Center, which can be downloaded from the Data Center Product Downloads section.
The Beagle analyzer has high-impedance inputs so it will not affect the system under test and distort the results. Simply attach the Beagle I2C/SPI analyzer inline to passively capture the data traffic to the target devices.
Captured data is streamed via High-Speed USB directly to your computer. The amount of data captured is limited only by the amount of physical memory that is available on the machine.
Not only can you get timings for an entire packet, it is also possible to get timing for each individual bit in the packet. The Beagle analyzer can return bit-level timing down to a 20 ns resolution.
The Beagle monitor is a bus-powered, High-Speed USB 2.0 device. This provides two major benefits. As a high speed device, all the data captured by the Beagle monitor are transferred to the test computer at 480 Mbps. As a bus-powered device, the Beagle monitor does not require a power adapter. This makes the Beagle monitor the ideal tool for engineers in the field. Just plug it into a High-Speed USB 2.0 port on your laptop and you are ready to go.
The Beagle I2C/SPIProtocol Analyzer comes complete with software for only $330 in single unit quantities. Additional discounts are available for larger volumes.
The low cost makes it affordable for a company to provide every developer with their own analyzer. The benefits of every developer having their own analyzer are:
By saving just a few hours of engineering time, the Beagle I2C/SPI analyzer will have paid for itself.
The Beagle monitor is completely field-upgradable via USB. Total Phase is committed to improving the Beagle analyzer and making these improvements available to our customers.
You will never have to worry about being out of step with the latest software features. Eligible Software and firmware upgrades are always freely available in the Downloads section of this website.
在线问
