沙特SABIC HDPE M40060高刚低翘曲
¥17.00
沙特SABIC HDPE M864EG高刚抗化学
¥17.00
沙特SABIC HDPE CC860V高抗冲
¥17.00
沙特SABIC HDPE M40053S抗紫外线耐低温
¥17.00
沙特SABIC HDPE CC027C高抗冲耐应力开裂
¥17.00
沙特SABIC HDPE CC027SL高刚高抗冲
¥17.00
沙特SABIC HDPE M80063S耐候高抗冲
Density / Specific Gravity | 964 | g/cm³ | ASTM D792 |
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
Environmental Stress-Cracking Resistance (ESCR) (Compression Molded) | 2.00 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
Durometer Hardness (Shore D, Injection Molded) | 53 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Strength | ASTM D638 | ||
Yield, Injection Molded | 25.0 | MPa | |
Break, Injection Molded | 27.0 | MPa | |
Tensile Elongation (Break, Injection Molded) | 430 | % | ASTM D638 |
Flexural Modulus (Injection Molded) | 864 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact (23°C, Injection Molded) | 84 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
Vicat Softening Temperature | 128 | °C | ASTM D1525 |
在线问
