经销日本高达增韧耐磨PC KOTEX K-30F5
¥28.50
批发日本高达超高流动PC KOTEX R-60
¥29.50
玻璃珠增强POM CELCON GB25
¥28.50
10%GF增强抗紫外POM CELCON GC10UV
¥28.50
15%玻纤增强POM CELCON GC15
¥28.50
代理日本高达30%玻纤耐磨PC KOTEX KG-30F15
Density / Specific Gravity | 1.57 | g/cm³ | ASTM D792 |
Molding Shrinkage - Flow | 0.30 to 0.50 | % | ASTM D955 |
Water Absorption (24 hr, 23°C) | 0.20 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Strength (Break) | 120 | MPa | ASTM D638 |
Tensile Elongation (Break) | 3.0 | % | ASTM D638 |
Flexural Modulus | 4900 | MPa | ASTM D790 |
Flexural Strength | 127 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact (23°C, 3.18 mm) | 120 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load (1.8 MPa, Unannealed) | 145 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
Dielectric Strength (1.60 mm) | 20 | kV/mm | ASTM D149 |
Dielectric Constant (1 MHz) | 3.20 | ASTM D150 | |
Dissipation Factor (1 MHz) | 8.0E-3 | ASTM D150 | |
Arc Resistance | 110 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
Flame Rating | V-0 | UL 94 |
PC工程塑料的三大应用领域是玻璃装配业、汽车工业和电子、电器工业，其次还有工业机械零件、光盘、包装、计算机等办公室设备、医疗及保健、薄膜、休闲和防护器材等。
PC可用作门窗玻璃，PC层压板广泛用于银行、使馆、拘留所和公共场所的防护窗，用于飞机舱罩，照明设备、工业安全档板和防弹玻璃。 PC板可做各种标牌，如汽油泵表盘、汽车仪表板、货栈及露天商业标牌、点式滑动指示器
代理日本高达30%玻纤耐磨PC KOTEX KG-30F15
在线问
