Horner APG Isolated Analog Current Input Modules has four analog input channels with 14-bits of resolution. The isolation levels for this unit are channel-to-channel and channel-to-ground. This module converts the current input signals to digital values which are placed directly into the %AI table of the PLC CPU. Each of the four channels of the module may be configured for an input range of 4-20mA or +/-20mA. Each of the four channels of the module has a programmable setpoint (the level of which is set in the PLC program via four %AQ output registers). When the analog input value reaches or exceeds the setpoint, a corresponding digital input %I is energized. The first four %Is represent the four input channel setpoint alarms respectively.
Steady-State Power Consumption | ADC415: .4W /80 mA @ 5V 2.16W /90 mA @ 24V, ADC 420: .7W /140 mA at 5V 1.2W /50 mA @ 24V |
Surge Current at Power-Up | ADC415: 120mA @ 5V 150mA @ 24V, ADC420: 200mA @ 5V 100mA @ 24V |
Number of Channels | 4 |
Input Range | 4-20mA, +/-20mA |
I/O Required | 4 %AI, 4 %AQ, 16 %I |
A/D Type, Resolution | Integrating, 18 bits |
Useable Resolution | 13 bits plus sign |
Module Update Rate | 45 channels/S |
Input Impedance | 100 ohms |
Digital Filtering | 1-128 samples / update |
Analog Filtering | 1KHz, 3 pole Bessel |
Maximum Error | .05% full scale |
Input Impedance | 1 Megohm |
Channel to Channel (ADC410) | 1500VAC (RMS), +/- 2000VDC |
Common Mode Range (ADC410) | 1500VAC (RMS), +/- 2000VDC |
Channel to Channel (ADC405) | 500VAC (RMS), +/-700VDC |
Common Mode Range (ADC405) | 500VAC (RMS), +/-700VDC |
Common Mode Rejection | >100dB |
Relative Humidity | 5% to 95%, non-condensing |
Operating Temperature | 0 to 60°C (32 to 140°F) |
-----------------------------------
主营产品:
Foxbore: I / a series system, FBM full series (field I / O module)
Sequence control, ladder logic control, accident recall processing, digital to analog conversion, input / output signal processing, data communication and processing, etc.
Vestinghouse (Westinghouse): spare parts for 1c31 series DCS system, CPU, ovati0n system, WDPF system and westation system.
Triconex: redundant fault-tolerant control system, modern fault-tolerant controller based on triple module redundancy (TMR) structure.
Emerson: modules, cards, drives and other spare parts.
Xycom: xvme series
Bently: 3500 / 3300 system.
Rockwell: ICs system.;
ABB: PM full series DCS system, ICT high voltage frequency converter series, dsqc series of industrial robot spare parts, infi 90, etc.
Bailey: BRC series DCS system, etc.
Allen Bradley: 1756, 1785, 1771, 1746 series systems, etc.
Yokogawa (Yokogawa): CP series, etc.
Honeywell: TK / TC / CC system, etc.
Reliance: 57c series, etc.
Modicon: as series PLC system spare parts.
Moore, a West sub CNC system, etc.
Motorola: mvme 162, mvme 167, myvme1772, mvme177 and other series.
Xycom: I / 0, vmee board, processor, etc.
Ge (General Electric): ic698 / ic697 full range of PLC systems, modules, cards, drives and other spare parts.
YASKAWA: servo controller, servo motor, servo driver.
Bosch Rexroth: indramat, I / O module, motor, PLC controller, drive module, etc.
Woodward: SPC valve position controller, peak150 digital controller.
IC693BEM331A, IC693BEM331B, IC693BEM331C, IC693BEM331D, IC693BEM331E, IC693BEM331F, IC693BEM331G, IC693BEM331H, IC693BEM331I, IC693BEM331J, IC693BEM331K, IC693BEM331L, IC693BEM331M, IC693BEM331N, IC693BEM331P, IC693BEM331Q, IC693BEM331R, IC693BEM331S, IC693BEM331T, IC693BEM331U, IC693BEM331V, IC693BEM331W, IC693BEM331X, IC693BEM331Y, IC693BEM331Z
GE Fanuc 90-70 IC697CPX928 is a 96 MHz, 32-Bit, Floating Point, 6 Mbyte (Medium) Memory CPU. The GE Fanuc 90-70 IC697CPX928 single slot CPU provides three serial ports, 6 Mbytes of battery-backed memory in the same slot. GE Fanuc 90-70 IC697CPX928 contains 256K of non-volatile user flash memory and supports 12K inputs and outputs and up to 8K analog I/O channels.
IC697CPX928A, IC697CPX928B, IC697CPX928C, IC697CPX928D, IC697CPX928E, IC697CPX928F, IC697CPX928G, IC697CPX928H, IC697CPX928I, IC697CPX928J, IC697CPX928K, IC697CPX928L, IC697CPX928M, IC697CPX928N, IC697CPX928P, IC697CPX928Q, IC697CPX928R, IC697CPX928S, IC697CPX928T, IC697CPX928U, IC697CPX928V, IC697CPX928W, IC697CPX928X, IC697CPX928Y, IC697CPX928Z, IC697CPX928-AA, IC697CPX928-AB, IC697CPX928-AC, IC697CPX928-AD, IC697CPX928-AE, IC697CPX928-AF, IC697CPX928-AG, IC697CPX928-AH, IC697CPX928-BA, IC697CPX928-BB, IC697CPX928-BC, IC697CPX928-BD, IC697CPX928-BE, IC697CPX928-BF, IC697CPX928-BG, IC697CPX928-BH, IC697CPX928-CA, IC697CPX928-CB, IC697CPX928-CC, IC697CPX928-CD, IC697CPX928-CE, IC697CPX928-CF, IC697CPX928-CG, IC697CPX928-DA, IC697CPX928-DB, IC697CPX928-DC, IC697CPX928-DD, IC697CPX928-DE, IC697CPX928-DF, IC697CPX928-DG, IC697CPX928-EA, IC697CPX928-EB, IC697CPX928-EC, IC697CPX928-ED, IC697CPX928-EE, IC697CPX928-EF, IC697CPX928-EG, IC697CPX928-FA, IC697CPX928-FB, IC697CPX928-FC, IC697CPX928-FD, IC697CPX928-FE, IC697CPX928-FF, IC697CPX928-FG, IC697CPX928-GA, IC697CPX928-GB, IC697CPX928-GC, IC697CPX928-GD, IC697CPX928-GE, IC697CPX928-GF, IC697CPX928-GG, IC697CPX928-GJ, IC697CPX928-GK, IC697CPX928-HA, IC697CPX928-HB, IC697CPX928-HC, IC697CPX928-JC, IC697CPX928-JD, IC697CPX928-JE