E-00000-411-600-1 DCS过冷裕量计算器组件 ABB
¥3137.00
RUSB-02 3AUA0000040000 模拟量前驱动模块 ABB
¥3137.00
- 商品
- 详情
TINT-41X1 10000501195 原厂自动化通讯卡 ABB
- ¥3278.00 1 - 9个
- ¥3137.00 ≥10个
参数
- 工控产品产品特性
- 否是否进口
- 美国产地
江西 瑞昌市
1天内发货
5173个
E-00000-411-600-1 DCS过冷裕量计算器组件 ABB
¥3137.00
RUSB-02 3AUA0000040000 模拟量前驱动模块 ABB
¥3137.00
产品详情
TINT-41X1 10000501195 原厂自动化通讯卡 ABB
TINT-41X1 10000501195 原厂自动化通讯卡 ABB
建议用于Windows环境中的常规office打印
● 与以前的PCL版本和较旧的HP LaserJet打印机兼容
● 从第三方或自定义软件程序打印的选择
● 在需要打印机的混合环境中操作时的选择
设置为PCL 5（UNIX、Linux、大型机）
● 专为在企业Windows环境中使用而设计，为
用于多种打印机型号
● 从移动Windows计算机打印到多个打印机型号时
HP UPD PCL 6● 建议在所有Windows环境中打印
● 为most提供总体速度、打印质量和打印机功能支持
使用者
● 开发用于与Windows图形设备接口（GDI）保持一致，以在
Windows环境
● 可能与第三方和自定义软件程序不完全兼容
基于PCL 5
检查EconoMode设置
HP不建议全职使用EconoMode。如果全时使用EconoMode，碳粉供应可能
超过碳粉盒中的机械部件。如果打印质量开始下降并且不再可接受，
请考虑更换碳粉盒。
注意：此功能可用于Windows的PCL 6打印驱动程序。如果您不使用该驱动程序，您可以
使用HP嵌入式Web服务器启用此功能。
如果整个页面太暗或太亮，请执行以下步骤。
1.从软件程序中选择打印选项。
2.选择打印机，然后单击“属性”或“项”按钮。
3.单击纸张/质量选项卡，找到打印质量区域。
4.如果整个页面太暗，请使用以下设置：
● 选择600 dpi选项。
● 选中经济模式复选框以启用它。
如果整个页面太轻，请使用以下设置：
● 选择FastRes 1200选项。
● 清除EconoMode复选框以禁用它。
5.单击“确定”按钮关闭“文档属性”对话框。在“打印”对话框中，单击“确定”按钮
打印作业。
调整打印密度
完成以下步骤以调整打印密度。
ENWW提高打印质量207
1.在打印机控制面板的主屏幕上，选择设置菜单。
2.打开以下菜单：
● 复制/打印或打印
● 印刷质量
● 墨粉密度
3.将滑块朝着所需密度设置的较小或较大方向移动。
208第9章解决ENWW中的问题
图像缺陷表
表9-1图像缺陷表快速参考
表9-2第211页的浅色打印表9-3灰色背景或深色打印
第211页
表9-4空白页-第212页无打印
表9-5第212页黑色页面表9-6第213页带状缺陷表9-7第213页条纹缺陷
ENWW图像缺陷表209
表9-1图像缺陷表快速参考（续）
表9-8第214页的定影/定影器缺陷表9-9第214页面的图像放置缺陷表9.10颜色平面配准缺陷
（***彩色型号）第215页
表9-11第215页的输出缺陷
图像缺陷，无论原因如何，通常可以使用相同的步骤解决。使用以下步骤作为
解决图像缺陷问题的起点。
1.重新打印文件。打印质量缺陷可以是间歇性的，也可以完全消除
继续打印。
2.检查墨盒的状况。如果盒带处于非常低的状态（已通过
额定寿命），更换墨盒。
3.确保驱动程序和托盘打印模式设置与托盘中加载的介质匹配。尝试使用
不同的介质或不同的托盘。尝试使用不同的打印模式。
4.确保打印机处于支持的工作温度/湿度范围内。
5.确保纸张类型、尺寸和重量
TINT-41X1 10000501195 原厂自动化通讯卡 ABB
TINT-41X1 10000501195 原厂自动化通讯卡 ABB
Recommended for general office printing in Windows environments
● Compatible with previous PCL versions and older HP LaserJet printers
● The best choice for printing from third-party or custom software programs
● The best choice when operating with mixed environments, which require the printer
to be set to PCL 5 (UNIX, Linux, mainframe)
● Designed for use in corporate Windows environments to provide a single driver for
use with multiple printer models
● Preferred when printing to multiple printer models from a mobile Windows computer
HP UPD PCL 6 ● Recommended for printing in all Windows environments
● Provides the overall best speed, print quality, and printer feature support for most
users
● Developed to align with Windows Graphic Device Interface (GDI) for best speed in
Windows environments
● Might not be fully compatible with third-party and custom software programs that
are based on PCL 5
Check the EconoMode settings
HP does not recommend the full-time use of EconoMode. If EconoMode is used full-time, the toner supply might
outlast the mechanical parts in the toner cartridge. If print quality begins to degrade and is no longer acceptable,
consider replacing the toner cartridge.
NOTE: This feature is available with the PCL 6 print driver for Windows. If you are not using that driver, you can
enable the feature by using the HP Embedded Web Server.
Follow these steps if the entire page is too dark or too light.
1. From the software program, select the Print option.
2. Select the printer, and then click the Properties or Preferences button.
3. Click the Paper/Quality tab, and locate the Print Quality area.
4. If the entire page is too dark, use these settings:
● Select the 600 dpi option.
● Select the EconoMode check box to enable it.
If the entire page is too light, use these settings:
● Select the FastRes 1200 option.
● Clear the EconoMode check box to disable it.
5. Click the OK button to close the Document Properties dialog box. In the Print dialog, click the OK button to
print the job.
Adjust print density
Complete the following steps to adjust the print density.
ENWW Improve print quality 207
1. From the Home screen on the printer control panel, select the Settings menu.
2. Open the following menus:
● Copy/Print or Print
● Print Quality
● Toner Density
3. Move the slider toward either Less or More to the desired density setting.
208 Chapter 9 Solve problems ENWW
Image defects table
Table 9-1 Image defects table quick reference
Table 9-2 Light print on page 211 Table 9-3 Gray background or dark print
on page 211
Table 9-4 Blank page — No print on page 212
Table 9-5 Black page on page 212 Table 9-6 Banding defects on page 213 Table 9-7 Streak defects on page 213
ENWW Image defects table 209
Table 9-1 Image defects table quick reference (continued)
Table 9-8 Fixing/fuser defects on page 214 Table 9-9 Image placement defects on page 214 Table 9-10 Color plane registrations defects
(color models only) on page 215
Table 9-11 Output defects on page 215
Image defects, no matter the cause, can often be resolved using the same steps. Use the following steps as a
starting point for solving image defect issues.
1. Reprint the document. Print quality defects can be intermittent in nature or can go away completely with
continued printing.
2. Check the condition of the cartridge or cartridges. If a cartridge is in a Very Low state (it has passed the
rated life), replace the cartridge.
3. Make sure that the driver and tray print mode settings match the media that is loaded in the tray. Try using
a diƫerent ream of media or a diƫerent tray. Try using a diƫerent print mode.
4. Make sure that the printer is within the supported operating temperature/humidity range.
5. Make sure that the paper type, size, and weight are
TINT-41X1 10000501195 原厂自动化通讯卡 ABB
为您推荐
-
-
-
MSK12-10-ES2-1GA 应用于控制器专用模块 BAUTZ ¥3137.00
-
-
NDCU-21 NDCU21 机体应用于驱动控制单元 ABB ¥3137.00
-
-
40PB3205A 备件PLC模块用于控制主电压的输入 ABB ¥3137.00
-
-
-
-
-
-
ABB 原厂 SAMT 11 脉冲放大器卡 57211369 ¥3137.00
-
-
-
-
-
在线问
产品参数
- 工控产品
- 否
- 美国
- 否
- ABB
- TP854 3BSE025349R1
- 220V
- 60KHZ
- PLC模块
- DCS模块
- PLC模块DCS模块
