HIMA F7123光纤接口板使用流程
¥3137.00
HIMA F7133采集卡如何使用
¥3137.00
HIMA F7553燃机卡使用配置说明
¥3137.00
HIMA F862011FIM卡产品颜色
¥3137.00
HIMA F8621ACPU模块使用授权
¥3137.00
HIMA F8627通讯模块配置手册
¥3137.00
产品标题：HIMA F6706计数板中文PDF使用手册
型号：F6706
质保：七天验收期，质保期一年
品牌：HIMA
产品图片展示
产品详情资料：
IDE接口由Intel I/O控制器集线器（ICH2）芯片提供。IDE接口支持两个通道，即主通道和辅助通道。辅助通道在板上路由到可选的紧凑型闪存插槽。主通道从VME背板路由至VMIACC-0562转换实用程序板，该板终止于标准的40针接头。此通道可以支持两个驱动器，一个主驱动器和一个从驱动器。VMIVME-7750上的IDE接口支持ATA-33、ATA-66和ATA-100驱动器，并根据使用的驱动器类型自动确定正确的操作模式。为了在ATA-100模式下正常工作，必须使用特殊的80芯电缆，而不是标准的40芯电缆。此电缆通常可从ATA-100驱动器制造商处获得。
产品英文详情资料：
The IDE interface is provided by the Intel I/O Controller Hub (ICH2) chip. The IDE interface supports two channels known as the primary and secondary channels. The secondary channel is routed on-board to the optional compact flash socket. The primary channel is routed out the VME backplane to a VMIACC-0562 transition utility board which terminates into a standard 40-pin header. This channel can support two drives, a master and slave. The IDE interface on the VMIVME-7750 supports ATA-33, ATA-66 and ATA-100 drives and automatically determines the proper operating mode based on the type of drive used. In order to properly function in the ATA-100 mode, a special 80 conductor cable must be used instead of the standard 40 conductor cable. This cable is typically available from the ATA-100 drive manufacturer.
在线问
