导电级PPE/PA NORYL GTX678
¥28.50
抗冲导电PPO NORYL GTX973
¥47.80
导电高流动PPE/PA NORYL GTX974
¥47.80
高耐热PPE/PA NORYL GTX918W
¥46.80
高流动增韧PPO NORYL NH4030B
¥45.80
高抗冲PPE/PS NORYL LS6010
¥44.80
沙伯基础40GF增强食品级PPO NORYL FE1740PW
Noryl* FE1740PW Polyphenylene Oxide (PPO) + Polystyrene (PS) resin is a 40 % Glass Reinforced, injection moldable grade with improved hydrolytic stability and with a Tensile Modulus > 11000 MPa; this grade has been developed for fluid engineering applications where higher static stiffness is required. Noryl* FE1740PW has been certified for potable water applications up to 85C in Europe and North America in limited colours.
Density / Specific Gravity | 1.40 | g/cm | ASTM D792,*** 1183 |
Melt Mass-Flow Rate (MFR)(300°C/5.0 kg) | 10 | g/10 min | ASTM D1238 |
Melt Volume-Flow Rate (MVR)(300°C/10.0 kg) | 20 | cm/10min | *** 1133 |
Molding Shrinkage - Flow(3.20 mm) | 0.090 to 0.15 | % | Internal Method |
Water Absorption | *** 62 | ||
Saturation, 23°C | 0.20 | % | |
Equilibrium, 23°C, 50% RH | 0.060 | % |
Charpy Unnotched Impact Strength7(23°C) | 30 | kJ/m | *** 179/1eU |
Notched Izod Impact | ASTM D256 | ||
-30°C | 90 | J/m | |
23°C | 110 | J/m | |
Unnotched Izod Impact Strength8 | *** 180/1U | ||
-30°C | 30 | kJ/m | |
23°C | 30 | kJ/m | |
Instrumented Dart Impact(23°C, Total Energy) | 18.0 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load | |||
1.8 MPa, Unannealed, 3.20 mm | 148 | °C | ASTM D648 |
1.8 MPa, Unannealed, 4.00 mm, 64.0 mm Span8 | 147 | °C | *** 75-2/Af |
PPO/PS合金耐热性突出，热变形温度在1.82MPa下，可以从75-170℃连续变化，随着PPO含量增加，材料的热变汽车工业形温度不断升高，用于满足不同场合的性能需求。PPO及其合金可以采用注塑、挤出、模压、发泡和电镀、真空镀膜、印刷机加工等各种加工方法。
在线问
