经销索尔维PSU UDEL P-3500 NT LCD高粘增韧高抗冲耐化学PSU
Density / Specific Gravity | 1.24 | g/cm | ASTM D792 |
Melt Mass-Flow Rate (MFR)(343°C/2.16 kg) | 4.0 to 6.0 | g/10 min | ASTM D1238 |
Molding Shrinkage - Flow | 0.70 | % | ASTM D955 |
Water Absorption(24 hr) | 0.30 | % | ASTM D570 |
Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus | 2480 | MPa | ASTM D638 |
Tensile Strength(Break) | 70.3 | MPa | ASTM D638 |
Tensile Elongation(Break) | 50 to 100 | % | ASTM D638 |
Flexural Modulus | 2690 | MPa | ASTM D790 |
Flexural Strength | 106 | MPa | ASTM D790 |
Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact | 69 | J/m | ASTM D256 |
Tensile Impact Strength | 420 | kJ/m | ASTM D1822 |
Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load(1.8 MPa, Unannealed) | 174 | °C | ASTM D648 |
CLTE - Flow | 5.6E-5 | cm/cm/°C | ASTM D696 |
Electrical | Nominal Value | Unit | Test Method |
Volume Resistivity | 3.0E+16 | ohms·cm | ASTM D257 |
Dielectric Strength | 17 | kV/mm | ASTM D149 |
Dielectric Constant | ASTM D150 | ||
60 Hz | 3.03 | ||
1 kHz | 3.04 | ||
1 MHz | 3.02 | ||
Dissipation Factor | ASTM D150 | ||
60 Hz | 7.0E-3 | ||
1 kHz | 1.0E-3 | ||
1 MHz | 6.0E-3 |