- 商品
- 详情
- 艾默生电源产品特性
- 否是否进口
- 美国产地
kKJ2201X1-BA1
kKJ2201X1-BA1
网络设备指挥中心交换机调试将
自动分配网络地址给交换机，使交换机
可以向DeltaV工作站发送PlantWeb警报。
DeltaV即插即用安装
DeltaV开关易于安装在您的DeltaV中
网络。因为它们是在工厂里预先配置好的，
安装很简单，安装单元，连接
通讯电缆，并启动设备。开关
配置为在上电时开始通信-
切换功能不需要额外的设置
正常工作。这将立即使系统返回到满状态
尽可能快地实现冗余功能，不浪费时间
安装前配置交换机。
调试在安装完成后从DeltaV工作站完成
交换机已投入使用。调测后的开关
在DeltaV和之间创建接口
充分利用智能交换机优势的交换机。
调试允许***开关设置参数
在交换机中进行预配置，所以他们只需要
系统输入一次。这些参数只需要
当需要修改默认设置时，需要修改。
一旦调试进程分配了一个网络地址
到交换机，它将自动开始报告PlantWeb
向工作站发出警报。它还允许网络设备
指挥中心访问网络诊断和一个
单击锁定安全应用程序。整合到三角洲
系统消除了预安装配置，并获得您的
系统尽快恢复到强度。
网络设备命令中心提供了对网络设备的概述
交换机状态信息，包括任何设备或网络警报
开关安全锁定状态
交换机和网络状态警报
使用标准的DeltaV设备状态报告
智能交换机将自动报告两者的状态
交换机运行状况和网络通信问题;
如开关通信故障、开关温度升高、
电源状态。另外，网络状态
通信如数据包冲突过多或过度
丢失的数据包表示网络问题，即DeltaV
系统提供了所有的网络状态信息
使用第三方简单网络管理协议
(SNMP)应用程序。
Security Event Reporting DeltaV Smart Switches will report
security-related events such as high network traffic that
indicates a denial-of-service attack is present and a port
-locking violation that indicates an unauthorized device has
been connected to a “locked” switch port. Users are notified
immediately that a security event has occurred and can take
actions to mitigate the attack.
Network Diagnostic Information The Network Device
Command Center provides detailed network statistics to
help in diagnosing network problems. Information is available
on a port-by-port basis so problem communications can
be easily ***lated. The parameters most commonly used in
troubleshooting network issues such as dropped packets are
consolidated on a single display and the information needed
is right at your fingertips so troubleshooting the DeltaV network
is easy.
Auto Security Lockdown
The DeltaV Smart Switches contain auto lockdown security
technology to prevent unauthorized access to the network.
The DeltaV Network Device Command Center will automatically
locate all of the Smart Switches in the network and display
their locked or unlocked status. From the Command Center
a privileged user can lock or unlock all the switches in the
network with a single click. Or they can select a single
switch or set of switches to lock or unlock.
The “lock” command tells the switch to find all of the unused
network ports and disable them. It will also memorize what
devices are connected on each local port to prevent an existing
device from being replaced by an unauthorized rogue device.
Another single click will command all the switches to “unlock,”
to add a new device, or to troubleshoot any network problems.
The optional 60-minute relock timer will automatically relock all
of the switches to prevent the devices from accidentally being
left in the insecure, unlocked state.
The Command Center can be run from just the ProfessionalPlus
or can also be installed on operator or maintenance stations for
easy user access.
All locking and unlocking events are logged in the DeltaV
Event Journal so you can easily monitor unlocking events for
unusual activity and to be sure proper security procedures
are being followed.
D
在线问
- 艾默生电源
- 否
- 美国
- 否
- EMERSON/艾默生
- kKJ2201X1-BA1
- 网络通信
- deltav兼容的设置
- DeltaV网络设备指挥中心
- CE
- 不需要用户配置
- 1
- BA1
