- 商品
- 详情
- 标准规格产品特性
- 否是否进口
- 日本产地
AFV30D-A41262
数字I/O模块(CENTUM-ST兼容)接收来自现场的接触或电压状态信号，和/或
通过晶体管触点向现场输出状态信号。
项规范
型号ADV859 ADV159 ADV559
I/O通道数16路输入，
16路输出32路输入32路输出
信号隔离隔离通道隔离通道隔离通道
输入信号
触点输入:关信号100 kΩ或更多
开信号200 Ω或更少
触点短路时的最小电流值:1.25 mA
电压输入:OFF信号4.5 ~ 25v DC
ON信号±1v DC, 200 Ω以下
- - - - - -
输入触点额定5v DC, 20ma或以上
按键输入功能不支持支持-
输入响应时间8ms(状态输入)8ms(状态输入)-
最小ON检测时间- 20毫秒(按钮输入)-
开/关周期- 25hz(用于按钮输入)-
输出信号晶体管触点-晶体管触点
电感负载、电阻负载:
30v DC, 100ma(*1) -感性负载，电阻性负载:
30v DC, 100ma (*1)
输出响应时间小于等于16ms -小于等于16ms
脉冲宽度8毫秒至7200秒- 8毫秒至7200秒
脉冲宽度分辨率8毫秒，添加值。开/关1毫秒
延迟时间- 8毫秒，添加值。开/关1毫秒
延迟时间
电流
功耗450ma (5v DC) 330ma (5v DC) 570ma (5v DC)
重量约0.30 kg约0.40 kg约0.30 kg
外部连接专用线缆(KS2)专用线缆(KS2)专用线缆(KS2)
兼容卡兼容ST2兼容ST3兼容ST4兼容
*1:驱动直流继电器时连接二极管。
项规范
型号ADV869, ADV169, ADV569
I/O通道数32路输入，
32路输出64路输入64路输出
信号隔离普通每16通道普通每16通道普通每16通道
输入信号
触点输入:关信号100 kΩ或更多
开信号200 Ω或更少
触点短路时的最小电流值:1.25 mA
电压输入:OFF信号4.5 ~ 25v DC
ON信号±1v DC, 200 Ω以下
- - - - - -
输入触点额定5v DC, 20ma或以上
按键输入功能不支持不支持-
输入响应时间8ms(状态输入)8ms(状态输入)-
输出信号晶体管触点-晶体管触点
电感负载、电阻负载:
30v DC, 100ma(*1) -感性负载，电阻性负载:
30v DC, 100ma (*1)
输出响应时间小于等于16ms -小于等于16ms
脉冲宽度8毫秒至7200秒- 8毫秒至7200秒
脉冲宽度分辨率8毫秒，添加值。开/开1毫秒
关闭延迟时间- 8毫秒，增加值。开/开1毫秒
关闭延时时间
电流
功耗800ma (5v DC) 800ma (5v DC) 800ma (5v DC)
重量约0.30 kg约0.30 kg
外部连接专用线缆(KS9)专用线缆(KS9)专用线缆(KS9)
兼容卡兼容ST5兼容ST6兼容ST7兼容
Model ADV151 Digital Input Module (32-channel, 24 V DC, ***lated)
Suffix
Codes
-P With pushbutton input
-E With SOE capture (*1)
5 Without status display; with no explosion protection
6 With status display; with no explosion protection
E Without status display; with explosion protection
F With status display; with explosion protection
0 Basic type
3 With ISA Standard G3 option and temperature (-20 to 70 °C) option
Option
Codes
/D***00 With KS Cable Interface Adapter for 32-channel digital [Model: ATD***-00]
/B5S00 With Pressure Clamp Terminal Block for Digital Input [Model: ATB5S-00]
/B5S10 With Pressure Clamp Terminal Block for Digital Input (surge absorber) [Model: ATB5S-10]
/B5D00 With Dual Pressure Clamp Terminal Block for Digital Input [Model: ATB5D-00]
/B5D10 With Dual Pressure Clamp Terminal Block for Digital Input (surge absorber) [Model: ATB5D-10]
/CCC01 With Connector Cover for MIL Cable [Model: ACCC01]
*1: Please refer to GS 33J30D10-01EN when using it.
Description
Model ADV161 Digital Input Module (64-channel, 24 V DC, ***lated)
Suffix
Codes
-P With pushbutton input
5 Without status display; with no explosion protection
E Without status display; with explosion protection
0 Basic type
1 With ISA Standard G3 option
Digital Output Module
Description
Model ADV551 Digital Output Module (32-channel, 24 V DC, ***lated)
Suffix
Codes
-P With pulse width output function/time-proportional output function
5 Without status display; with no explosion protection
6 With status display; with no explosion protection
E Without status display; with explosion protection
F With status display; with explosion protection
0 Basic type
3 With ISA Standard G3 option and temperature (-20 to 70 °C) option
Option
Codes
/D***00 With KS Cable Interface Adapter for 32-channel Digital [Model : ATD***-00]
/D5S00 With Pressure Clamp Terminal Block for Digital Output [Model : ATD5S-00]
/D5S10 With Pressure Clamp Terminal Block for Digital Output (surge absorber) [Model : ATD5S-10]
/D5D00 With Dual Pressure Clamp Terminal Block for Digital Output [Model : ATD5D-00]
/D5D10 With Dual Pressure Clamp Terminal Block for Digital Output (surge absorber) [Model : ATD5D-10]
/CCC01 With Connector Cover for MIL Cable [Model : ACCC01]
Description
Model ADV561 Digital Output Module (64-channel, 24 V DC, ***lated)
Suffix
Codes
-P With pulse width output function/time-proportional output function
5 Without status display; with no explosion protection
E Without status display; with explosion protection
0 Basic type
1 With ISA Standard G3 option
Model ADV859 Digital I/O Module for Compatible ST2 (16-channel input/16-channel output, ***lated channels)
Suffix
Codes
-P With pulse width function/time-proportional output function
0 Always 0
0 Basic type
1 With ISA Standard G3 option
Description
Model ADV159 Digital Input Module for Compatible ST3 (32-channel, ***lated channels)
Suffix
Codes
-P With pushbutton input
0 Always 0
0 Basic type
1 With ISA Standard G3 option
Description
Model ADV559 Digital Output Module for Compatible ST4 (32-channel output, ***lated channels)
Suffix
Codes
-P With pulse width function/time-proportional output function
0 Always 0
0 Basic type
1 With ISA Standard G3 option
Description
Model ADV869 Digital I/O Module for Compatible ST5
(32-channel input/32-channel output, ***lated, Common Minus Side Every 16-channel)
Suffix
Codes
-P With pulse width function/time-proportional output function
0 Always 0
0 Basic type
1 With ISA Standard G3 option
Description
Model ADV169 Digital Input Module for Compatible ST6 (64-channel, ***lated, Common Minus Side Every 16-channel)
Suffix
Codes
-P Standard type
0 Always 0
0 Basic type
1 With ISA Standard G3 option
Description
Model ADV569 Digital Output Module for Compatible ST7
(64-channel output, ***lated, Common Minus Side Every 16-channel)
Suffix
Codes
-P With pulse width function/time-proportional output function
0 Always 0
0 Basic type
1 With ISA Standard G3 option
n APPLICABLE STANDARDS
Refer to the GS “Integrated Production Control System CENTUM VP System Overview” (GS 33J01A10-01EN).
n ORDERING INFORMATION
Specify the model and suffix codes.
For selecting the right products for explosion protection, please refer to TI 33Q01J30-01E without fail
在线问
- 标准规格
- 否
- 日本
- 否
- YOKOGAWA/横河
- AFV30D-A41262
- 数字输入输出模块
- 支持双冗余配置
- 输入通道数32 64
- CE
- 状态输入检测功能
- 1
- H50
