- 商品
- 详情
- 标准规格产品特性
- 否是否进口
- 日本产地
SFP GRVSFP-675FA
n GENERAL
By installing the control bus interface card into the PCI
Express slot of the PC/AT compatible computer, the
computer is connected to Vnet/IP.
n FUNCTION
Interface between the PCI Express and Vnet/IP
n STANDARD SPECIFICATIONS
Communication Speed
1 Gbps Full Duplex
Connection Specifications
Cable: CAT5e (Enhanced Category 5 cable), UTP
Transmission: 1000BASE-T compliance
Connector: RJ45 connector
Max. distance: 100 m (Distance between VI702 and
Layer 2 switch)
PCI Express Specifications
Applicable revision:
PCI Express CEM Specification 1.0a x1,
2.5 GT/s signaling
This card can be installed in a PCI Express slot (x1
to x16).
This card cannot be installed in a PCI slot.
Voltage
Power supply voltage: 3.3 V ± 9 %
Current Consumption
Max. 2.5 A
Weight
Approx. 0.18 kg
Nominal Tolerances :
When the reference dimension is over 0.5 mm and equal or less than 120 mm, its nominal tolerance is ± 0.8 mm, while its
combination of nominal tolerance is ± 1.5 mm.
When the reference dimension is over 120 mm, its nominal tolerance is in accordance with JEM 1459.
n MODEL AND SUFFIX CODE
Description
Model VI702 Vnet/IP Interface Card
n APPLICABLE STANDARDS
Refer to the GS “Integrated Production Control System CENTUM VP System Overview” (GS 33J01A10-01EN).
n ORDERING INFORMATION
Specify model.
n TRADEMARKS
• CENTUM and Vnet/IP are registered trademark of Yokogawa Electric Corporation.
• Other company and product names appearing in this document are trademarks or registered trademarks of their
respective holders
在线问
- 标准规格
- 否
- 日本
- 否
- YOKOGAWA/横河
- SFP GRVSFP-675FA
- 型数字输入模块
- 具有脉宽输出功能
- 时间比例输出功能
- CE
- 具有防爆功能
- 1
- H50
