LNP Thermocomp D251RC 玻璃纤维、阻燃剂聚碳酸酯树脂的化合物

¥98.00 ≥25千克起批

参数

否是否进口
中国厂家(产地)
D251RC 牌号

发货地广东东莞不限

东莞市聚浩塑化有限公司 2年: 进入店铺在线咨询

LNP THERMOCOMP D351 玻璃纤维、阻燃剂 ¥98.00

LNP THERMOCOMP D351RC 良好的平整度、良好的冲击性能、无卤阻燃剂 ¥98.00

LNP THERMOCOMP D451 高模量、良好的平整度、良好的延展性、非溴化和非氯化阻燃剂 ¥98.00

LNP Thermocomp D451RC 含有玻璃纤维、阻燃剂的回收聚碳酸酯树脂的化合物 ¥98.00

LNP Thermocomp D452 独特的聚碳酸酯共聚物树脂的化合物 ¥98.00

LNP THERMOCOMP D551RC 高模量，良好的平整度，良好的冲击性能 ¥98.00

产品详情

PROPERTIES		TYPICAL VALUES	UNITS	TEST METHODS
FLAME CHARACTERISTICS	¹⁾
UL Yellow Card Link		E207780-103127360	-	-
UL Recognized, 94V-0 Flame Class Rating		≥0.6	mm	UL 94
UL Recognized, 94V-1 Flame Class Rating		≥0.5	mm	UL 94
Glow Wire Ignitability Temperature, 2.0 mm		850	°C	IEC 60695-2-13
Glow Wire Ignitability Temperature, 1.0 mm		850	°C	IEC 60695-2-13
Glow Wire Ignitability Temperature, 1.6 mm		850	°C	IEC 60695-2-13
Glow Wire Flammability Index, 2.0 mm		960	°C	IEC 60695-2-12
Glow Wire Flammability Index, 1.0 mm		960	°C	IEC 60695-2-12
Glow Wire Flammability Index, 1.6 mm		960	°C	IEC 60695-2-12
MECHANICAL	²⁾
Flexural Modulus, 1.3 mm/min, 50 mm span		6050	MPa	ASTM D790
Flexural Stress, yld, 1.3 mm/min, 50 mm span		161	MPa	ASTM D790
Flexural Stress, brk, 1.3 mm/min, 50 mm span		158	MPa	ASTM D790
Flexural Modulus, 2 mm/min		6150	MPa	ISO 178
Flexural Stress, yield, 2 mm/min		161	MPa	ISO 178
Flexural Stress, break, 2 mm/min		160	MPa	ISO 178
Tensile Modulus, 5 mm/min		6700	MPa	ASTM D638
Tensile Stress, brk, Type I, 5 mm/min		109	MPa	ASTM D638
Tensile Strain, brk, Type I, 5 mm/min		2.6	%	ASTM D638
Tensile Modulus, 1 mm/min		6650	MPa	ISO 527
Tensile Stress, break, 5 mm/min		107	MPa	ISO 527
Tensile Strain, break, 5 mm/min		2.6	%	ISO 527
IMPACT	²⁾
Izod Impact, notched, 23°C		140	J/m	ASTM D256
Izod Impact, notched, -30°C		90	J/m	ASTM D256
Izod Impact, unnotched, 23°C		680	J/m	ASTM D4812
Izod Impact, notched 80104 +23°C		13	kJ/m²	ISO 180/1A
Izod Impact, notched 80104 -30°C		9	kJ/m²	ISO 180/1A
Izod Impact, unnotched 80104 +23°C		41	kJ/m²	ISO 180/1U
Instrumented Dart Impact Total Energy, 23°C		22	J	ASTM D3763
THERMAL	²⁾
HDT, 1.82 MPa, 3.2mm, unannealed		115	°C	ASTM D648
HDT, 0.45 MPa, 3.2 mm, unannealed		120	°C	ASTM D648
HDT/Af, 1.8 MPa Flatw 80104 sp=64mm		116	°C	ISO 75/Af
HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm		121	°C	ISO 75/Bf
Vicat Softening Temp, Rate B/50		122	°C	ISO 306
Vicat Softening Temp, Rate B/120		125	°C	ISO 306
CTE, 23°C to 80°C, flow		2.6E-05	1/°C	ASTM E831
CTE, 23°C to 80°C, xflow		7.5E-05	1/°C	ASTM E831
CTE, -40°C to 40°C, flow		2.5E-05	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow		6.3E-05	1/°C	ASTM E831
Relative Temp Index, Elec	¹⁾	80	°C	UL 746B
Relative Temp Index, Mech w/impact	¹⁾	80	°C	UL 746B
Relative Temp Index, Mech w/o impact	¹⁾	80	°C	UL 746B
PHYSICAL	²⁾
Density		1.35	g/cm³	ASTM D792
Melt Flow Rate, 300°C/2.16 kgf		25	g/10 min	ASTM D1238
Melt Flow Rate, 300°C/1.2 kgf		12	g/10 min	ASTM D1238
Melt Volume Rate, MVR at 300°C/2.16 kg		21	cm³/10 min	ISO 1133
Melt Volume Rate, MVR at 300°C/1.2 kg		10	cm³/10 min	ISO 1133
Mold Shrinkage, flow, 24 hrs	⁴⁾	0.2-0.4	%	ASTM D955
Mold Shrinkage, xflow, 24 hrs	⁴⁾	0.2-0.4	%	ASTM D955
Water Absorption, (23°C/24hrs)		0.03	%	ISO 62-1
ELECTRICAL	²⁾
Dielectric Constant, 1.1 GHz		3.25	-	SABIC method
Dielectric Constant, 1.9 GHz		3.26	-	SABIC method
Dielectric Constant, 5 GHz		3.26	-	SABIC method
Dielectric Constant, 10 GHz		3.26	-	SABIC method
Dissipation Factor, 1.1 GHz		0.0068	-	SABIC method
Dissipation Factor, 1.9 GHz		0.0069	-	SABIC method
Dissipation Factor, 5 GHz		0.0071	-	SABIC method
Dissipation Factor, 10 GHz		0.0073	-	SABIC method
Surface Resistivity		>1.0E+16	Ω	ASTM D257
Volume Resistivity		>1.0E+16	Ω.cm	ASTM D257
Comparative Tracking Index (UL) {PLC}		3	PLC Code	UL 746A
INJECTION MOLDING	³⁾
Drying Temperature		110	°C
Drying Time		3-6	Hrs
Maximum Moisture Content		0.02	%
Melt Temperature		285-310	°C
Nozzle Temperature		285-305	°C
Front - Zone 3 Temperature		280-300	°C
Middle - Zone 2 Temperature		270-290	°C
Rear - Zone 1 Temperature		260-280	°C
Mold Temperature		80-110	°C
Back Pressure		0.1-0.3	MPa
Screw Speed		50-90	rpm