LNP Thermocomp DX15354 具有改进的耐热性能

¥98.00 ≥25千克起批

参数

否是否进口
中国厂家(产地)
DX15354牌号

发货地广东东莞不限

东莞市聚浩塑化有限公司 2年: 进入店铺在线咨询

LNP THERMOCOMP DZ004 20%研磨玻璃的聚碳酸酯树脂 ¥98.00

LNP THERMOCOMP EC004APQ 基于含20%碳纤维的聚醚酰亚胺 ¥125.00

LNP THERMOCOMP EC004XXC 含有20%碳纤维的聚醚酰亚胺树脂 ¥98.00

LNP THERMOCOMP EC005 聚醚酰亚胺树脂的化合物，含有25%的碳纤维 ¥98.00

LNP THERMOCOMP EC006APQ 含有30%碳纤维的聚醚酰亚胺 ¥98.00

LNP THERMOCOMP EC006AQW 含碳纤维的聚醚酰亚胺树脂 ¥98.00

产品详情

PROPERTIES		TYPICAL VALUES	UNITS	TEST METHODS
MECHANICAL	¹⁾
Tensile Stress, brk, Type I, 5 mm/min		59	MPa	ASTM D638
Tensile Strain, brk, Type I, 5 mm/min		11	%	ASTM D638
Tensile Modulus, 5 mm/min		2920	MPa	ASTM D638
Flexural Strength, 1.3 mm/min, 50 mm span		111	MPa	ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span		2890	MPa	ASTM D790
Tensile Stress, break, 50 mm/min		58	MPa	ISO 527
Tensile Strain, break, 50 mm/min		11	%	ISO 527
Tensile Modulus, 1 mm/min		2940	MPa	ISO 527
Flexural Strength, 2 mm/min		112	MPa	ISO 178
Flexural Modulus, 2 mm/min		2880	MPa	ISO 178
IMPACT	¹⁾
Izod Impact, unnotched, 23°C		2160	J/m	ASTM D4812
Izod Impact, notched, 23°C		61	J/m	ASTM D256
Izod Impact, unnotched 80103 +23°C		182	kJ/m²	ISO 180/1U
Izod Impact, notched 80103 +23°C		7	kJ/m²	ISO 180/1A
THERMAL	¹⁾
HDT, 0.45 MPa, 3.2 mm, unannealed		168	°C	ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed		155	°C	ASTM D648
CTE, -40°C to 40°C, flow		6.3E-05	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow		6.7E-05	1/°C	ASTM E831
PHYSICAL	¹⁾
Density		1.29	g/cm³	ASTM D792
Moisture Absorption (23°C / 50% RH)		0.13	%	ISO 62
Melt Volume Rate, MVR at 330°C/1.2 kg		22.8	cm³/10 min	ISO 1133
ELECTRICAL	¹⁾
Dielectric Constant, 1.1 GHz		2.95	-	SABIC method
Dissipation Factor, 1.1 GHz		0.006	-	SABIC method
INJECTION MOLDING	²⁾
Drying Temperature		135	°C
Drying Time		4-6	Hrs
Maximum Moisture Content		0.02	%
Melt Temperature		300-345	°C
Nozzle Temperature		295-340	°C
Front - Zone 3 Temperature		300-345	°C
Middle - Zone 2 Temperature		290-335	°C
Rear - Zone 1 Temperature		280-315	°C
Mold Temperature		95-130	°C
Back Pressure		0.3-0.7	MPa
Screw Speed		40-90	rpm
Shot to Cylinder Size		40-60	%
Vent Depth		0.025-0.08	mm

为您推荐

LNP THERMOCOMP EC006E 含有30%碳纤维的聚醚酰亚胺树脂 ¥98.00
LNP THERMOCOMP EC006PXQ 基于聚醚酰亚胺的化合物，含有30%的碳纤维 ¥128.00
LNP THERMOCOMP EC008 基于含碳纤维的聚醚酰亚胺树脂 ¥128.00
LNP THERMOCOMP EC008APQ 含有40%碳纤维的聚醚酰亚胺 ¥98.00
LNP THERMOCOMP EC008PXQ 含40%碳纤维的聚醚酰亚胺 ¥118.00
LNP THERMOCOMP ECF62 含有30%的玻璃纤维和10%的碳纤维 ¥78.00

LNP THERMOCOMP EX00781H 医疗保健 ¥158.00
LNP THERMOCOMP EX06430H 医疗保健 ¥118.00
LNP THERMOCOMP EX11413 含有碳纤维的聚醚酰亚胺树脂 ¥78.00
LNP THERMOCOMP EX11413 有碳纤维的聚醚酰亚胺树脂 ¥118.00
LNP THERMOCOMP EX11414 含有20%碳纤维的聚醚酰亚胺 ¥115.00
LNP THERMOCOMP EX93452 导电 ¥158.00

供应商网> 特种塑料> LNP Thermocomp DX15354 具有改进的耐热性能

在线问

产品参数

是否进口否
厂家(产地)中国
牌号DX15354
用途级别注塑

1/2

¥98.00 在线咨询

进店客服获取最低报价拨打电话

LNP Thermocomp DX15354 具有改进的耐热性能: ¥98.00