NORYL FP3060 未填充的可注射成型的改性聚苯醚树脂

¥56.00 ≥25千克起批

参数

否是否进口
中国厂家(产地)
FP3060 牌号

发货地广东东莞不限

东莞市聚浩塑化有限公司 3年: 进入店铺在线咨询

NORYL FP5140 耐热性、耐水解性、低密度和全面阻燃性 ¥56.00

NORYL FP5140HF 良好的流变性能、耐热性、耐水解性、低密度和薄壁阻燃性 ¥56.00

NORYL GFN1 10%玻璃纤维增强 ¥56.00

NORYL GFN1720 20%玻璃纤维增强 ¥56.00

NORYL GFN1F 10%玻璃纤维增强 ¥56.00

NORYL GFN2 20%玻璃纤维增强 ¥56.00

产品详情

PROPERTIES		TYPICAL VALUES	UNITS	TEST METHODS
FLAME CHARACTERISTICS	1)
UL Yellow Card Link		E45329-100064745	-	-
UL Recognized, 94V-0 Flame Class Rating		≥2.5	mm	UL 94
UL Recognized, 94V-1 Flame Class Rating		≥1.5	mm	UL 94
MECHANICAL	2)
Tensile Stress, yld, Type I, 50 mm/min		54	MPa	ASTM D638
Tensile Stress, brk, Type I, 50 mm/min		55	MPa	ASTM D638
Tensile Strain, yld, Type I, 50 mm/min		3	%	ASTM D638
Tensile Strain, brk, Type I, 50 mm/min		12	%	ASTM D638
Tensile Modulus, 50 mm/min		2200	MPa	ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span		84	MPa	ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span		2400	MPa	ASTM D790
Tensile Stress, yield, 50 mm/min		55	MPa	*** 527
Tensile Stress, break, 50 mm/min		42	MPa	*** 527
Tensile Strain, yield, 50 mm/min		3	%	*** 527
Tensile Strain, break, 50 mm/min		11	%	*** 527
Tensile Modulus, 1 mm/min		2420	MPa	*** 527
Flexural Stress, yield, 2 mm/min		82	MPa	*** 178
Flexural Modulus, 2 mm/min		2530	MPa	*** 178
IMPACT	2)
Izod Impact, notched, 23°C		78	J/m	ASTM D256
Izod Impact, notched 80104 +23°C		6	kJ/m²	*** 180/1A
Izod Impact, notched 80104 -30°C		5	kJ/m²	*** 180/1A
Charpy 23°C, V-notch Edgew 80104 sp=62mm		6	kJ/m²	*** 179/1eA
THERMAL	2)
Vicat Softening Temp, Rate B/50		105	°C	ASTM D1525
HDT, 1.82 MPa, 3.2mm, unannealed		80	°C	ASTM D648
CTE, -40°C to 40°C, flow		8.3E-05	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow		8.E-05	1/°C	ASTM E831
CTE, -40°C to 40°C, flow		8.3E-05	1/°C	*** 11359-2
CTE, -40°C to 40°C, xflow		8.E-05	1/°C	*** 11359-2
Vicat Softening Temp, Rate B/50		91	°C	*** 306
Vicat Softening Temp, Rate B/120		93	°C	*** 306
HDT/Af, 1.8 MPa Flatw 80104 sp=64mm		74	°C	*** 75/Af
Relative Temp Index, Elec	1)	65	°C	UL 746B
Relative Temp Index, Mech w/impact	1)	65	°C	UL 746B
Relative Temp Index, Mech w/o impact	1)	65	°C	UL 746B
PHYSICAL	2)
Specific Gravity		1.1	-	ASTM D792
Density		1.1	g/cm³	*** 1183
Water Absorption, (23°C/saturated)		0.13	%	*** 62-1
Moisture Absorption (23°C / 50% RH)		0.02	%	*** 62
Melt Volume Rate, MVR at 280°C/1.2 kg		20	cm³/10 min	*** 1133
Melt Volume Rate, MVR at 280°C/2.16 kg		41	cm³/10 min	*** 1133
INJECTION MOLDING	3)
Drying Temperature		65-75	°C
Drying Time		2-3	Hrs
Melt Temperature		250-285	°C
Nozzle Temperature		240-270	°C
Front - Zone 3 Temperature		250-285	°C
Middle - Zone 2 Temperature		230-260	°C
Rear - Zone 1 Temperature		200-220	°C
Hopper Temperature		60-80	°C
Mold Temperature		40-65	°C

为您推荐

NORYL GFN20 PPE+PS混合物。20%玻璃纤维增强 ¥56.00
NORYL GFN2RC3 高强度、水解稳定性、低翘曲、低比重和尺寸稳定性 ¥43.00
NORYL GFN3 30%玻璃增强。低吸水性 ¥43.00
NORYL GFN30 30%玻璃增强 ¥43.00
NORYL GFN30F 低吸水性水解稳定性 ¥43.00
NORYL GFN30F PPE（聚苯醚）+PS（聚苯乙烯）共混物。30%玻璃纤维增强 ¥56.00

SABIC Noryl GFN3F 水解稳定性。尺寸稳定性。适用于流体工程应用 ¥56.00
SABIC Noryl GNF3 3 0%玻璃纤维增强。低吸水性。水解稳定性 ¥39.00
SABIC Noryl GFN3V ¥39.00
SABIC Noryl HF185 阻燃且流动性好 ¥56.00
SABIC Noryl HM3020H PPE+PS GF+MF 30%填充，FR V-1，高流量 ¥56.00
SABIC Valox HM4025H PPE/PS混合物，高流动性 ¥56.00

SABIC Noryl HN731SE 用于医疗器械和制药应用 ¥56.00
SABIC Noryl HNA033 未填充的改性聚苯醚树脂 ¥56.00
SABIC Noryl HNA055 ¥56.00
SABIC Noryl HNA055 个人防护装备 ¥67.00
SABIC Noryl HS2000X 矿物增强17%。无溴、无氯阻燃体系 ¥67.00
SABIC Noryl IGN320 用于高温、高模量的汽车应用 ¥56.00

供应商网> 特种塑料> NORYL FP3060 未填充的可注射成型的改性聚苯醚树脂

在线问

产品参数

是否进口否
厂家(产地)中国
牌号FP3060
用途级别注塑

1/2

¥56.00 在线咨询

进店客服获取最低报价拨打电话

NORYL FP3060 未填充的可注射成型的改性聚苯醚树脂: ¥56.00