沙伯基础NSF级ABS CYCOLAC MG38N
Very high impact ABS. Toughness/rigidity. Good fatigue resistance. NSF Standard 61.
Density / Specific Gravity | 1.05 | g/cm | ASTM D792 |
Melt Mass-Flow Rate (MFR) | |||
230°C/3.8 kg | 3.7 | g/10 min | ASTM D1238 |
220°C/10.0 kg | 15 | g/10 min | ISO 1133 |
Molding Shrinkage - Flow(3.20 mm) | 0.50 to 0.80 | % | Internal Method |
Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus2 | 2270 | MPa | ASTM D638 |
Tensile Strength3 | ASTM D638 | ||
Yield | 45.0 | MPa | |
Break | 34.0 | MPa | |
Tensile Elongation3 | ASTM D638 | ||
Yield | 2.1 | % | |
Break | 26 | % | |
Flexural Modulus4(50.0 mm Span) | 2340 | MPa | ASTM D790 |
Flexural Strength4(Yield, 50.0 mm Span) | 72.0 | MPa | ASTM D790 |
Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact(23°C) | 370 | J/m | ASTM D256 |
Instrumented Dart Impact(23°C, Total Energy) | 31.0 | J | ASTM D3763 |
Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load | ASTM D648 | ||
0.45 MPa, Unannealed, 3.20 mm | 95.0 | °C | |
1.8 MPa, Unannealed, 3.20 mm | 80.0 | °C | |
Vicat Softening Temperature | 99.0 | °C | ASTM D15255 |
光泽和易成型性,所以在家电和小家电中更有着***的市场,如家用传真机、音响、VCD中也大量***ABS为原料,吸尘器中也使用了很多ABS制作的零件,厨房用具也大量使用了ABS制作的零件。