1.为了降低触电风险,之前已在断路器或保险丝盒处切断电源
开始
2.所有接线必须符合国家电气规范NASI/NFPA 70-1999和当地电气规范
代码。电气安装应由合格的持证电工进行。
3.出线盒和支撑结构必须安装牢固,并能够可靠地支撑351b。
(15.9kg)。仅使用UL列出的标有“可接受35lbs(15.9kg)或以下风机支撑”的出线盒
4.风扇的安装高度必须至少为7英尺。(2m)叶片后缘至地面的间隙。
5.风扇叶片运动时,请勿操作换向开关。您必须关闭风扇并停止
在反转刀片方向之前,请使用刀片。
6.请勿将物体放置在叶片的路径中。
鹦鹉叔叔标志
鹦鹉叔叔F6217吊扇用户指南
鹦鹉叔叔F6217吊扇用户指南
三月六日,,
2022
留下
议论
手册+-简化用户手册。
7.为避免人身伤害或损坏风扇和其他物品,请在周围工作或
清洁风扇。
8.电气图仅供参考。未与风扇一起包装的灯套件必须经过UL认证,并且
标记为适合与正在安装的风扇型号一起使用。开关必须是UL通用开关。
有关正确组装,请参阅随灯套件和开关一起包装的说明。
9.进行电气连接后,应将拼接导线向上转动,并小心地向上推入
出线盒。导线应与接地导线和设备接地分开
出线盒一侧的导线。
10.安装前,必须检查所有固定螺钉并在必要时重新拧紧。
安全提示
1.为了避免可能的电击,在开始之前关闭主保险丝盒或电路板的电源
风扇安装或维修风扇或安装附件之前。
2.安装风扇前,请仔细阅读所有说明和安全信息,并保存这些说明。
3.确保所有电气连接符合当地规范或条例以及国家电气规范。如果
如果您不熟悉电线,请使用合格且有执照的电工。
4.确保为风扇选择了一个位置,以便为叶片旋转留出空间,并且至少
地板和风扇叶片***之间的间隙为七(7)英尺。风扇应至少安装30个
距墙壁或其他直立结构(30)英寸。
5.警告:使用的出线盒和天花板支撑托梁必须安装牢固,并能支撑
至少100磅。为了降低火灾、触电或人身伤害的风险,安装到标有
可接受风扇支撑,并使用出线盒提供的安装螺钉。盒子一定是
直接由建筑结构支撑。
6.警告:为了降低火灾、触电或人身伤害的风险,安装在标有“可接受”的出线盒上
用于风扇支架”和使用安装
插座盒提供的螺钉。大多数用于支撑照明设备的插座盒没有
可接受风扇支撑,可能需要更换。如有疑问,请咨询合格电工。
7.电气图仅供参考。未与风扇一起包装的灯套件必须经过UL认证并标记
适用于正在安装的风扇型号。开关必须是UL。通用开关。参考
与灯套件和开关一起包装的说明,用于正确组装。
8.安装完成后,检查所有连接是否安全。
9.进行电气连接后,应将拼接导线向上转动,并小心地向上推入
出线盒。导线应与接地导线和设备接地分开
出线盒一侧的导线。
10.警告:为了降低电击和火灾的风险,请勿在任何固态风扇转速下使用该风扇
控制装置或变阻器。
11.在风扇完全停止之前,不要分离反转开关。
12.当风扇叶片旋转时,不要将任何东西插入其中。
13.警告:为降低人身伤害风险,请勿弯曲叶片支架(也称为“法兰”)
在组装期间或安装之后。请勿在刀片的路径中插入对象。
14.为避免人身伤害或损坏风扇和其他物品,在周围工作或清洁时应小心
足总
1. To reduce the risk of electric shock, the electricity has been turned off at the circuit breaker or fuse box before begin. 2. All wiring must be in accordance with the National Electrical Code NASI/NFPA 70-1999 and local electrical codes. Electrical installation should be performed by a qualified licensed electrician. 3. The outlet box and support structure must be securely mounted and capable of reliably supporting 351b. (15.9kg).Use only UL listed outlet boxes marked “Acceptable for Fan Support of 35lbs(15.9kg)or less.” 4. The fan must be mounted with a minimum of 7ft. (2m) clearance from the trailing edge of the blades to the floor. 5. Do not operate the reversing switch while the fan blades are in motion. You must turn the fan off and stop the blades before you reverse the blade direction. 6. Do not place objects in the path of the blades. Parrot Uncle Logo Parrot Uncle F6217 Ceiling Fan User Guide Parrot Uncle F6217 Ceiling Fan User Guide March 6, 2022 Leave a comment Manuals+ — User Manuals Simplified. 7. To avoid personal injury or damage to the fan and other items, please be careful when working around or cleaning the fan. 8. Electrical diagrams are for reference only. Light kits that are not packed with the fan must be UL-listed and marked suitable for use with the model fan you are installing. Switches must be UL General Use Switches. Refer to the instructions packaged with the light kits and switches for proper assembly. 9. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box. 10. All setscrews must be checked and retightened where necessary before installation. SAFETY TIP 1. To avoid possible electric shock, turn off the electricity at the main fuse box or circuit panel before you begin the fan installation or before servicing the fan or installing accessories. 2. Read all instructions and safety information carefully before installing your fan and save these instructions. 3. Make sure all electrical connections comply with local codes or ordinances and the National Electrical Code. If you are unfamiliar with electric wiring, please use a qualified and licensed electrician. 4. Make sure you have a location selected for your fan that allow clear space for the blades to rotate, and at least seven (7) feet of clearance between the floor and the fan blade tips. The fan should be mounted at least thirty (30) inches from walls or other upright structures. 5. WARNING: The outlet box and ceiling support joist used must be securely mounted, and capable of supporting at least 100 pounds. To reduce the risk of fire, electric shock or personal injury, mount to the outlet box marked acceptable for fan supported and use mounting screws provided with the outlet box. The box must be supported directly by the building structure. 6. WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “acceptable for fan support” and use mounting screws provided with the outlet box most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt. 7. Electrical diagrams are for reference only. Light kits that are not packed with the fan must UL listed and marked suitable for use with the model fan you are installing. Switches must be UL. general use switches. Refer to the instructions packaged with the light kits and switches for proper assembly. 8. After installation is complete, check that all connections are absolutely secure. 9. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box. 10. WARNING: To reduce the risk of electrical shock and fire, do not use this fan with any solid-state fan speed control device, or rheostat. 11. Do not separate the reverse switch until the fan has come to a complete stop. 12. Do not insert anything into the fan blades while they are rotating. 13. WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to as “flanges”) during assembly or after installation. Do not insert objects in the path of the blades. 14. To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fa