20%GF/PP Lupol GP2200
¥18.30
20%玻纤高抗冲PP Lupol HI2202B
¥18.30
10%玻纤增强PP Lupol GP2100
¥18.50
矿物增强耐候PP Lupol GP3202
¥18.50
高光矿物增强PP Lupol HG3200SK2
¥18.50
20%MF增强PP Lupol GP3200
¥18.30
经销韩国LG PP Lupol GP230030%GF
Density / Specific Gravity | 1.14 | g/cm | ASTM D792 |
Melt Mass-Flow Rate (MFR)(230°C/2.16 kg) | 6.0 | g/10 min | ASTM D1238 |
Molding Shrinkage - Flow(3.20 mm) | 0.10 to 0.30 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Strength3(Yield, 3.20 mm) | 83.4 | MPa | ASTM D638 |
Tensile Elongation3(Break, 3.20 mm) | 3.0 | % | ASTM D638 |
Flexural Modulus4(6.40 mm) | 4900 | MPa | ASTM D790 |
Flexural Strength4(6.40 mm) | 118 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact(23°C, 3.20 mm) | 780 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load(1.8 MPa, Unannealed, 6.40 mm) | 155 | °C | ASTM D648 |
RTI Elec(1.5 mm) | 65.0 | °C | UL 746 |
RTI Imp(1.5 mm) | 65.0 | °C | UL 746 |
RTI Str(1.5 mm) | 65.0 | °C | UL 746 |
在线问
