GRIVORY HT2VZ-15H瑞士EMS耐酒精15%玻纤PPA
Density | 1.24 | -- | g/cm | ISO 1183 |
Molding Shrinkage | ISO 294-4 | |||
Across Flow | 0.90 | -- | % | |
Flow | 0.40 | -- | % | |
Water Absorption | ISO 62 | |||
Saturation, 23°C | 5.5 | -- | % | |
Equilibrium, 23°C, 50% RH | 2.0 | -- | % | |
Hardness | Dry | Conditioned | Unit | Test Method |
Shore Hardness(Shore D, 15 sec) | 84 | 82 | ISO 868 |
Mechanical | Dry | Conditioned | Unit | Test Method |
Tensile Modulus | 6000 | 6000 | MPa | ISO 527-2 |
Tensile Stress(Break) | 125 | 100 | MPa | ISO 527-2 |
Tensile Strain(Break) | 3.0 | 3.5 | % | ISO 527-2 |
Impact | Dry | Conditioned | Unit | Test Method |
Charpy Notched Impact Strength | ISO 179/1eA | |||
-30°C | 5.0 | 5.0 | kJ/m | |
23°C | 10 | 10 | kJ/m | |
Charpy Unnotched Impact Strength | ISO 179/1eU | |||
-30°C | 45 | 40 | kJ/m | |
23°C | 65 | 55 | kJ/m |
Thermal | Dry | Conditioned | Unit | Test Method |
Heat Deflection Temperature | ||||
1.8 MPa, Unannealed | 265 | -- | °C | ISO 75-2/A |
8.0 MPa, Unannealed | 100 | -- | °C | ISO 75-2/C |
Continuous Use Temperature | ||||
--2 | 140 | -- | °C | ISO 2578 |
--3 | 260 | -- | °C | Internal Method |
Melting Temperature4 | 310 | -- | °C | ISO 11357-3 |
CLTE | ISO 11359-2 | |||
Flow | 3.0E-5 | -- | cm/cm/°C | |
Transverse | 7.5E-5 | -- | cm/cm/°C |
Electrical | Dry | Conditioned | Unit | Test Method |
Surface Resistivity | -- | 1.0E+12 | ohms | IEC 60093 |
Volume Resistivity | 1.0E+12 | 1.0E+12 | ohms·cm | IEC 60093 |
Electric Strength | 33 | 32 | kV/mm | IEC 60243-1 |
Comparative Tracking Index | -- | 575 | V | IEC 60112 |
Flammability | Dry | Conditioned | Unit | Test Method |
Flammability Classification(0.8 mm) | HB | -- | IEC 60695-11-10, -20 |
PPA树脂比脂肪类聚酰胺如尼龙6,6等更结实坚硬;对水分的敏感度***;热性能更好;而且蠕变、疲劳和耐化学品性能也好得多。例如:含 45%玻璃短纤维的PPA树脂,抗张强度约276MPa,弯曲模量超过13786MPa,热变形温度(HDT)549°F。即使矿物填料级的PPA,抗张强度也能达到117MPa。PPA树脂的延展性不如尼龙6,6,然而,已经开发出未增强的冲击改性级PPA树脂,其缺口悬臂梁式冲击强度高达20英尺·磅/英寸。