耐低温阻燃PPO NORYL V0150B
¥36.50
15%GF增强PPO NORYL V01550
¥36.50
食品级30GF/PPO NORYL WM330G
¥36.50
矿物增强PPO NORYL ZM3242
¥36.50
阻燃低翘曲PPO NORYL ZM3640
¥36.50
30GF/PPO NORYL GTX APS430
¥36.50
***美国SABIC PPO NORYL SE1X阻燃纯树脂
Density / Specific Gravity | 1.10 | ASTM D792 | |
Melt Mass-Flow Rate (MFR)(280°C/5.0 kg) | 8.5 | g/10 min | ASTM D1238 |
Melt Volume-Flow Rate (MVR)(280°C/5.0 kg) | 8.0 | cm/10min | *** 1133 |
Molding Shrinkage | Internal Method | ||
Across Flow2 | 0.50 to 0.70 | % | |
Flow : 0.126 in | 0.50 to 0.70 | % | |
Water Absorption(24 hr) | 0.060 | % | ASTM D570 |
Outdoor Suitability | f1 | UL 746C |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus | |||
--3 | 363000 | psi | ASTM D638 |
-- | 387000 | psi | *** 527-2/1 |
Notched Izod Impact | |||
-22°F | 2.0 | ft·lb/in | ASTM D256 |
73°F | 3.4 | ft·lb/in | ASTM D256 |
73°F9 | 6.7 | ft·lb/in | *** 180/1A |
Unnotched Izod Impact(73°F) | 49 | ft·lb/in | ASTM D4812 |
Instrumented Dart Impact(73°F, Total Energy) | 434 | in·lb | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load | |||
66 psi, Unannealed, 0.126 in | 259 | °F | ASTM D648 |
66 psi, Unannealed, 0.252 in | 259 | °F | ASTM D648 |
66 psi, Unannealed, 0.157 in, 3.94 in Span10 | 264 | °F | *** 75-2/Be |
264 psi, Unannealed, 0.126 in | 234 | °F | ASTM D648 |
264 psi, Unannealed, 0.252 in | 244 | °F | ASTM D648 |
264 psi, Unannealed, 0.157 in, 3.94 in Span10 | 239 | °F | *** 75-2/Ae |
在线问
