LNP THERMOCOMP AW00A 含有硅灰石的丙烯腈-丁二烯-苯乙烯树脂

参数

发货地广东东莞不限

产品详情

PROPERTIES		TYPICAL VALUES	UNITS	TEST METHODS
MECHANICAL	¹⁾
Tensile Stress, yield, 5 mm/min		25	MPa	*** 527
Tensile Strain, yield, 5 mm/min		2.1	%	*** 527
Tensile Modulus, 1 mm/min		3400	MPa	*** 527
Flexural Stress, yield, 2 mm/min		49	MPa	*** 178
Flexural Stress, break, 2 mm/min		39	MPa	*** 178
Flexural Strain, break, 2 mm/min		5.9	%	*** 178
Flexural Modulus, 2 mm/min		3900	MPa	*** 178
IMPACT	¹⁾
Izod Impact, unnotched 80104 +23°C		15	kJ/m²	*** 180/1U
Izod Impact, notched 80104 +23°C		5	kJ/m²	*** 180/1A
THERMAL	¹⁾
CTE, 23°C to 60°C, flow		6.9E-05	1/°C	*** 11359-2
CTE, 23°C to 60°C, xflow		9.3E-05	1/°C	*** 11359-2
HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm		95	°C	*** 75/Bf
HDT/Af, 1.8 MPa Flatw 80104 sp=64mm		81	°C	*** 75/Af
PHYSICAL	¹⁾
Mold Shrinkage, flow	³⁾	0.5	%	SABIC method
Density		1.38	g/cm³	*** 1183
Water Absorption, (23°C/24hrs)		0.24	%	*** 62-1
INJECTION MOLDING	²⁾
Drying Temperature		80	°C
Drying Time		4	Hrs
Maximum Moisture Content		0.05-0.1	%
Melt Temperature		260	°C
Front - Zone 3 Temperature		265-275	°C
Middle - Zone 2 Temperature		230-245	°C
Rear - Zone 1 Temperature		205-215	°C
Mold Temperature		70-80	°C
Back Pressure		0.2-0.3	MPa
Screw Speed		30-60	rpm

为您推荐

供应商网> 特种塑料> LNP THERMOCOMP AW00A 含有硅灰石的丙烯腈-丁二烯-苯乙烯树脂

在线问

产品参数

1/2

¥98.00 在线咨询