取消
搜索
搜索
ultem ultem棒 加纤ultem 瑞士ultem ultem板材 ultem棒材 茶色ultem 纯料ultem 黑色ultem 美国ultem
  • 商品
  • 详情

ULTEM EXUM0167 延展性提高，透明，标准流动聚醚酰胺
参数
  • 否是否进口
  • 中国厂家(产地)
  • EXUM0167牌号
广东 东莞 不限
东莞市聚浩塑化有限公司 2年
进入店铺 在线咨询
产品详情

PROPERTIES
TYPICAL VALUESUNITSTEST METHODS
FLAME CHARACTERISTICS1)


UL Yellow Card Link
E121562-100737020--
UL Recognized, 94V-0 Flame Class Rating
≥0.75mmUL 94
Oxygen Index (LOI)
46%ASTM D2863
NBS Smoke Density, Flaming, Ds 4 min
0.7-ASTM E662
MECHANICAL



Tensile Stress, yld, Type I, 5 mm/min
95MPaASTM D638
Tensile Stress, brk, Type I, 5 mm/min
90MPaASTM D638
Tensile Strain, yld, Type I, 5 mm/min
7%ASTM D638
Tensile Strain, brk, Type I, 5 mm/min
85%ASTM D638
Tensile Modulus, 5 mm/min
2900MPaASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span
140MPaASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span
3000MPaASTM D790
Tensile Stress, yield, 50 mm/min
97MPaISO 527
Tensile Stress, break, 50 mm/min
80MPaISO 527
Tensile Strain, yield, 50 mm/min
7%ISO 527
Tensile Strain, break, 50 mm/min
80%ISO 527
Flexural Stress, yield, 2 mm/min
136MPaISO 178
Flexural Modulus, 2 mm/min
2800MPaISO 178
IMPACT



Izod Impact, notched, 23°C
70J/mASTM D256
Izod Impact, Reverse Notched, 3.2 mm
3300J/mASTM D256
Instrumented Dart Impact Total Energy, 23°C
93JASTM D3763
Instrumented Impact Total Energy, 0°C
99JASTM D3763
Instrumented Impact Total Energy, -20°C
93JASTM D3763
Instrumented Dart Impact Ductility, 23°C
100%ASTM D3763
Instrumented Dart Impact Ductility, 0°C
100%ASTM D3763
Instrumented Dart Impact Ductility, -20°C
90%ASTM D3763
Izod Impact, unnotched 80*10*4 +23°C
NBkJ/m²ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C
NBkJ/m²ISO 180/1U
Izod Impact, notched 80*10*4 +23°C
6kJ/m²ISO 180/1A
Izod Impact, notched 80*10*4 -30°C
6kJ/m²ISO 180/1A
Charpy Impact, notched, 23°C
11kJ/m²ISO 179/2C
THERMAL



HDT, 0.45 MPa, 6.4 mm, unannealed
214°CASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed
204°CASTM D648
CTE, -20°C to 150°C, flow
5.6E-051/°CASTM E831
CTE, -20°C to 150°C, xflow
5.5E-051/°CASTM E831
Thermal Conductivity
0.19W/m-°CASTM C177
CTE, 23°C to 150°C, flow
5.E-051/°CISO 11359-2
CTE, 23°C to 150°C, xflow
5.E-051/°CISO 11359-2
Vicat Softening Temp, Rate A/50
219°CISO 306
Vicat Softening Temp, Rate B/50
212°CISO 306
Vicat Softening Temp, Rate B/120
212°CISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm
205°CISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm
190°CISO 75/Ae
Relative Temp Index, Elec1)105°CUL 746B
Relative Temp Index, Mech w/impact1)105°CUL 746B
Relative Temp Index, Mech w/o impact1)105°CUL 746B
PHYSICAL



Specific Gravity
1.28-ASTM D792
Mold Shrinkage, flow, 3.2 mm
0.5-0.7%SABIC method
Melt Flow Rate, 337°C/6.6 kgf
10g/10 minASTM D1238
Density
1.28g/cm³ISO 1183
Melt Volume Rate, MVR at 360°C/5.0 kg
14cm³/10 minISO 1133
ELECTRICAL



Comparative Tracking Index (UL) {PLC}
4PLC CodeUL 746A
Hot-Wire Ignition (HWI), PLC 1
≥1.5mmUL 746A
Hot-Wire Ignition (HWI), PLC 2
≥0.75mmUL 746A
High Amp Arc Ignition (HAI), PLC 1
≥0.75mmUL 746A
INJECTION MOLDING



Drying Temperature
150°C
Drying Time
6-8Hrs
Drying Time (Cumulative)
24Hrs
Maximum Moisture Content
0.02%
Melt Temperature
355-390°C
Nozzle Temperature
345-390°C
Front - Zone 3 Temperature
345-390°C
Middle - Zone 2 Temperature
335-390°C
Rear - Zone 1 Temperature
330-390°C
Mold Temperature
130-160°C
Back Pressure
0.3-0.7MPa
Screw Speed
40-70rpm
Shot to Cylinder Size
40-60%
Vent Depth
0.025-0.076mm


为您推荐
供应商网> 特种塑料> ULTEM EXUM0167 延展性提高，透明，标准流动聚醚酰胺
    在线问
    产品参数
    1/2
    ¥128.00 在线咨询
    进店 客服 获取最低报价 拨打电话
    ULTEM EXUM0167 延展性提高，透明，标准流动聚醚酰胺
    ¥128.00
    • 采购产品
    • 采购数量
    • 联系电话
    《服务条款》 并允许推荐更多供应商为您服务
    请阅读并同意《服务条款》

    获取成功

    请您注意近期来电

    看这里，您也可以拨打电话咨询产品哦~

    咨询电话：𐀇𐀈𐀇 𐀉𐀊𐀋𐀋 𐀌𐀋𐀌𐀈

    关闭 产品推荐
    知道了