Noryl FE1520PW 含 20% 的玻璃增强材料

¥43.00 ≥25千克起批

参数

否是否进口
中国厂家(产地)
FE1520PW牌号

发货地广东东莞不限

东莞市聚浩塑化有限公司 2年: 进入店铺在线咨询

Noryl FE1630PW 30%玻璃增强 ¥56.00

Noryl FE1740PW 聚苯醚（PPO）+聚苯乙烯（PS）树脂是一种40%玻璃增强 ¥43.00

NORYL FN150 符合UL标准94 V-0/5V等级 ¥43.00

NORYL FN150 标准94 V-0/5V等级 ¥56.00

NORYL FN150X 薄壁。UL94 V-0/5VA等级 ¥56.00

NORYL FN170X 发泡树脂 ¥56.00

产品详情

PROPERTIES		TYPICAL VALUES	UNITS	TEST METHODS
INJECTION MOLDING	1)
Drying Temperature		100-120	°C
Drying Time		2-4	Hrs
Maximum Moisture Content		0.02	%
Melt Temperature		290-320	°C
Nozzle Temperature		290-320	°C
Front - Zone 3 Temperature		300-310	°C
Middle - Zone 2 Temperature		280-300	°C
Rear - Zone 1 Temperature		270-280	°C
Hopper Temperature		60-80	°C
Mold Temperature		80-120	°C
FLAME CHARACTERISTICS	2)
UL Yellow Card Link		E45329-101519378	-	-
UL Recognized, 94HB Flame Class Rating		≥1.5	mm	UL 94
MECHANICAL	3)
Tensile Stress, brk, Type I, 5 mm/min		119	MPa	ASTM D638
Tensile Strain, brk, Type I, 5 mm/min		2.6	%	ASTM D638
Tensile Modulus, 5 mm/min		7100	MPa	ASTM D638
Flexural Stress, brk, 1.3 mm/min, 50 mm span		175	MPa	ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span		6970	MPa	ASTM D790
Taber Abrasion, CS-17, 1 kg		65	mg/1000cy	SABIC method
Tensile Stress, break, 5 mm/min		119	MPa	*** 527
Tensile Strain, break, 5 mm/min		2.6	%	*** 527
Tensile Modulus, 1 mm/min		7170	MPa	*** 527
Flexural Stress, break, 2 mm/min		165	MPa	*** 178
Flexural Modulus, 2 mm/min		6040	MPa	*** 178
Ball Indentation Hardness, H358/30		220	MPa	*** 2039-1
IMPACT	3)
Izod Impact, unnotched, 23°C		400	J/m	ASTM D4812
Izod Impact, unnotched, -30°C		395	J/m	ASTM D4812
Izod Impact, notched, 23°C		65	J/m	ASTM D256
Izod Impact, notched, -30°C		45	J/m	ASTM D256
Izod Impact, unnotched 80104 +23°C		25	kJ/m²	*** 180/1U
Izod Impact, unnotched 80104 -30°C		23	kJ/m²	*** 180/1U
Izod Impact, notched 80104 +23°C		6	kJ/m²	*** 180/1A
Izod Impact, notched 80104 -30°C		4	kJ/m²	*** 180/1A
Charpy Impact, notched, 23°C		6	kJ/m²	*** 179/2C
Charpy -30°C, V-notch Edgew 80104 sp=62mm		5	kJ/m²	*** 179/1eA
Charpy Impact, notched, -30°C		27	kJ/m²	*** 179/2C
Charpy 23°C, Unnotch Edgew 80104 sp=62mm		30	kJ/m²	*** 179/1eU
THERMAL	3)
HDT, 1.82 MPa, 3.2mm, unannealed		135	°C	ASTM D648
CTE, -40°C to 40°C, flow		3.E-05	1/°C	*** 11359-2
CTE, -40°C to 40°C, xflow		7.E-05	1/°C	*** 11359-2
Vicat Softening Temp, Rate A/50		150	°C	*** 306
Vicat Softening Temp, Rate B/120		144	°C	*** 306
HDT/Be, 0.45MPa Edgew 120104 sp=100mm		139	°C	*** 75/Be
HDT/Ae, 1.8 MPa Edgew 120104 sp=100mm		132	°C	*** 75/Ae
Relative Temp Index, Elec	2)	65	°C	UL 746B
Relative Temp Index, Mech w/impact	2)	65	°C	UL 746B
Relative Temp Index, Mech w/o impact	2)	65	°C	UL 746B
PHYSICAL	3)
Moisture Absorption, (50% RH, Equilibrium)		0.06	%	ASTM D570
Mold Shrinkage, flow, 3.2 mm	4)	0.2-0.4	%	SABIC method
Mold Shrinkage, xflow, 3.2 mm	4)	0.3-0.6	%	SABIC method
Density		1.24	g/cm³	*** 1183
Water Absorption, (23°C/saturated)		0.2	%	*** 62-1
Melt Volume Rate, MVR at 280°C/10.0 kg		22	cm³/10 min	*** 1133

为您推荐

NORYL FP3060 未填充的可注射成型的改性聚苯醚树脂 ¥56.00
NORYL FP5140 耐热性、耐水解性、低密度和全面阻燃性 ¥56.00
NORYL FP5140HF 良好的流变性能、耐热性、耐水解性、低密度和薄壁阻燃性 ¥56.00
NORYL GFN1 10%玻璃纤维增强 ¥56.00
NORYL GFN1720 20%玻璃纤维增强 ¥56.00
NORYL GFN1F 10%玻璃纤维增强 ¥56.00

NORYL GFN2 20%玻璃纤维增强 ¥56.00
NORYL GFN20 PPE+PS混合物。20%玻璃纤维增强 ¥56.00
NORYL GFN2RC3 高强度、水解稳定性、低翘曲、低比重和尺寸稳定性 ¥43.00
NORYL GFN3 30%玻璃增强。低吸水性 ¥43.00
NORYL GFN30 30%玻璃增强 ¥43.00
NORYL GFN30F 低吸水性水解稳定性 ¥43.00

NORYL GFN30F PPE（聚苯醚）+PS（聚苯乙烯）共混物。30%玻璃纤维增强 ¥56.00
SABIC Noryl GFN3F 水解稳定性。尺寸稳定性。适用于流体工程应用 ¥56.00
SABIC Noryl GNF3 3 0%玻璃纤维增强。低吸水性。水解稳定性 ¥39.00
SABIC Noryl GFN3V ¥39.00
SABIC Noryl HF185 阻燃且流动性好 ¥56.00
Zytel HTNFR55G50NHLW BK046 玻纤增强, 阻燃, 无卤, 高温尼龙面议

供应商网> 特种塑料> Noryl FE1520PW 含 20% 的玻璃增强材料

在线问

产品参数

是否进口否
厂家(产地)中国
牌号 FE1520PW
用途级别注塑

1/2

¥43.00 在线咨询

进店客服获取最低报价拨打电话

Noryl FE1520PW 含 20% 的玻璃增强材料: ¥43.00