IC693PWR330 is a High Capacity Power Supply with 30 watts output and 120/240 VAC/125 VDC Input. There are applications that might need high +5V current capacity which may not be present with the standard supply(IC693PWR321).Therefore, this high capacity power supply permits each one of the 30 watts to be utilized from the +5V supply. IC693PWR330 can function from an input voltage source within the range of 85 to 264 VAC or 100 to 300 VDC. This power supply offers a +5 VDC output, +24 VDC Relay power outputs which distribute power to circuits on Series 90-30 Output Relay modules. An Isolated +24 VDC utilized internally by some modules may be used to offer external power for 24 VDC Input modules. IC693PWR330 has field Wiring Connections for the AC/DC Input Power Supplies. These two power supplies consist of 6 terminals used for user link up. These links include; AC Power Source, 20 VAC power source, and ground wires from the 240 VAC power source. They are attached to the system via the top 3 terminals on the front of the power supply. Their sensitivity to an AC/DC input power supply is normally low.
IC693PWR330 contains input overvoltage protection devices which have an internal connection on pin 4 found on the user terminal strip. This pin is linked to pin 3 with the offered strapped jumper that is well set up at the company. The strapped jumper can be removed to make the character nonfunctional in case overvoltage protection is not needed from both pins 3 and 4. It also requires overcurrent protection which is offered by the 5V logic output which is electronically limited to 3.5 amps (7 amps for high capacity supplies). Whenever there is excess load it is sensed on the inside which may lead to shutting down of the power. An internal fuse in the input acts as a power back up in case of such occurrences. It also safeguards the power supply from internal supply faults.
Nominal Rated Voltage:
120/240 VAC or 125 VDC
Input Voltage Range:
85 to 264 VAC or 100 to 300 VDC
Input Power:
100VA with VAC or 50 W with VDC
Load Capacity:
30 Watts
Location on Baseplates:
Leftmost Slot
Communication:
RS 485 Serial Port
-----------------------------------
主营产品：
Foxbore: I / a series system, FBM full series (field I / O module) Sequence control, ladder logic control, accident recall processing, digital to analog conversion, input / output signal processing, data communication and processing, etc. Vestinghouse (Westinghouse): spare parts for 1c31 series DCS system, CPU, ovati0n system, WDPF system and westation system. Triconex: redundant fault-tolerant control system, modern fault-tolerant controller based on triple module redundancy (TMR) structure. Emerson: modules, cards, drives and other spare parts. Xycom: xvme series Bently: 3500 / 3300 system. Rockwell: ICs system.; ABB: PM full series DCS system, ICT high voltage frequency converter series, dsqc series of industrial robot spare parts, infi 90, etc. Bailey: BRC series DCS system, etc. Allen Bradley: 1756, 1785, 1771, 1746 series systems, etc. Yokogawa (Yokogawa): CP series, etc. Honeywell: TK / TC / CC system, etc. Reliance: 57c series, etc. Modicon: as series PLC system spare parts. Moore, a West sub CNC system, etc. Motorola: mvme 162, mvme 167, myvme1772, mvme177 and other series. Xycom: I / 0, vmee board, processor, etc. Ge (General Electric): ic698 / ic697 full range of PLC systems, modules, cards, drives and other spare parts. YASKAWA: servo controller, servo motor, servo driver. Bosch Rexroth: indramat, I / O module, motor, PLC controller, drive module, etc. Woodward: SPC valve position controller, peak150 digital controller.
The GE Fanuc 90-30 IC693BEM331 Genius Bus Controller (GBC) is the interface between a Series 90-30 PLC and a Genius I/O serial bus. The Fanuc 90-30 IC693BEM331 accepts and transmits control data of up to 128 bytes for up to 31 devices on the Genius I/O bus. Up to eight GE IC693BEM331 modules are capable of being included in a Series 90-30 PLC system that has release 5.0 or later Logicmaster 90-30 software, and release 5.0 or later CPU firmware.
通用GE电气HE693RTD601Q工控应用DCS系统模块
¥1352.00
