GRIVORY HT1V-45 HY增强45%玻纤PPA
¥49.50
GRIVORY HT1V-5 HY高耐热50%玻纤PPA
¥49.50
GRIVORY HT1V-65H增强65%玻纤PPA
¥49.50
GRIVORY HT2V-15H***15%GF/PPA
¥48.50
GRIVORY HT1V-4 HY瑞士EMS耐化学40%GF/PPA
Grivory HT1V-4 HY black 9205 is a Polyamide 6I/6T Copolymer (Nylon 6I/6T) material filled with 40% glass fiber.
Density | 1.53 | -- | g/cm | ISO 1183 |
Molding Shrinkage | ISO 294-4 | |||
Across Flow | 0.60 | -- | % | |
Flow | 0.10 | -- | % | |
Water Absorption | ISO 62 | |||
Saturation, 23°C | 3.5 | -- | % | |
Equilibrium, 23°C, 50% RH | 1.5 | -- | % | |
| Hardness | Dry | Conditioned | Unit | Test Method |
Ball Indentation Hardness | 310 | 300 | MPa | ISO 2039-1 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
Tensile Modulus | 14500 | 14000 | MPa | ISO 527-2 |
Tensile Stress(Break) | 220 | 210 | MPa | ISO 527-2 |
Tensile Strain(Break) | 2.0 | 2.0 | % | ISO 527-2 |
| Impact | Dry | Conditioned | Unit | Test Method |
Charpy Notched Impact Strength | ISO 179/1eA | |||
-30°C | 8.0 | 8.0 | kJ/m | |
23°C | 8.0 | 8.0 | kJ/m | |
Charpy Unnotched Impact Strength | ISO 179/1eU | |||
-30°C | 70 | 70 | kJ/m | |
23°C | 70 | 70 | kJ/m |
| Thermal | Dry | Conditioned | Unit | Test Method |
Heat Deflection Temperature | ||||
1.8 MPa, Unannealed | 280 | -- | °C | ISO 75-2/A |
8.0 MPa, Unannealed | 200 | -- | °C | ISO 75-2/C |
Continuous Use Temperature | ||||
--2 | 150 | -- | °C | ISO 2578 |
--3 | 250 | -- | °C | Internal Method |
Melting Temperature4 | 325 | -- | °C | ISO 11357-3 |
CLTE | ISO 11359-2 | |||
Flow | 1.5E-5 | -- | cm/cm/°C | |
Transverse | 5.0E-5 | -- | cm/cm/°C |
| Electrical | Dry | Conditioned | Unit | Test Method |
Surface Resistivity | -- | 1.0E+12 | ohms | IEC 60093 |
Volume Resistivity | 1.0E+13 | 1.0E+13 | ohms·cm | IEC 60093 |
Electric Strength | 30 | 30 | kV/mm | IEC 60243-1 |
Comparative Tracking Index | -- | 600 | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
Flammability Classification(0.8 mm) | HB | -- | IEC 60695-11-10, -20 |
PPA强度、韧度和硬度优越性能，以及其良好的耐热件，耐化学性及抗开裂能力
PPA由于高温和高湿环境下仍能保持强度和硬度，可在传统的尼龙和聚酯所无法随的就用中替换金属
PPA塑料还具有优越的表面光泽性。可以对其进行着色而避免了表面喷涂，从而有助于降低表面划痕和刮痕的明显程度。
在线问
