10%GF增强PPO/PA NORYL GTX4610
¥43.50
耐化学PPO/PA NORYL GTX600
¥36.50
PPO/PA NORYL GTX6009耐热耐化学
¥42.50
PPO/PA NORYL GTX6203矿物增强20%
¥43.50
高耐热PPO/PA NORYL GTX626
¥42.50
导电PPO/PA NORYL GTX674PC
¥43.50
原包沙伯基础***食品级PPO NORYL 731S
Density / Specific Gravity | 1.08 | g/cm | ASTM D792 |
Molding Shrinkage - Flow(3.20 mm) | 0.50 to 0.70 | % | Internal Method |
Water Absorption(24 hr, 23°C) | 0.060 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Strength2(Yield) | 58.0 | MPa | ASTM D638 |
Tensile Elongation2(Break) | 30 | % | ASTM D638 |
Flexural Modulus3(50.0 mm Span) | 2420 | MPa | ASTM D790 |
Flexural Strength3(Yield, 50.0 mm Span) | 93.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact | ASTM D256 | ||
-40°C | 130 | J/m | |
23°C | 210 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load | ASTM D648 | ||
1.8 MPa, Unannealed, 3.20 mm | 117 | °C | |
1.8 MPa, Unannealed, 6.40 mm | 126 | °C | |
CLTE - Flow(-40 to 60°C) | 1.3E-4 | cm/cm/°C | ASTM E831 |
RTI Elec4 | 105 | °C | UL 746 |
RTI Imp4 | 90.0 | °C | UL 746 |
RTI Str4 | 105 | °C | UL 746 |
在线问
