NORYL EM6101 良好的性能保持/宽温度范围

参数

发货地广东东莞不限

NORYL EN185 挤出级 ¥43.00

NORYL EN265 UL94 V-1级别 ¥43.00

产品详情

PROPERTIES		TYPICAL VALUES	UNITS	TEST METHODS
MECHANICAL	1)
Tensile Stress, yld, Type I, 50 mm/min		53	MPa	ASTM D638
Tensile Strain, brk, Type I, 50 mm/min		50	%	ASTM D638
Flexural Stress, yld, 2.6 mm/min, 100 mm span		81	MPa	ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span		2300	MPa	ASTM D790
IMPACT	1)
Izod Impact, notched, 23°C		320	J/m	ASTM D256
Izod Impact, notched, -40°C		160	J/m	ASTM D256
Instrumented Dart Impact Energy @ peak, 23°C		53	J	ASTM D3763
Instrumented Dart Impact Energy @ peak, -30°C		25	J	ASTM D3763
THERMAL	1)
HDT, 0.45 MPa, 6.4 mm, unannealed		123	°C	ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed		121	°C	ASTM D648
CTE, 0°C to 100°C, flow		9.36E-05	1/°C	ASTM E831
PHYSICAL	1)
Specific Gravity		1.05	-	ASTM D792
Water Absorption, (23°C/24hrs)		0.2	%	ASTM D570
Mold Shrinkage, flow, 3.2 mm	3)	0.5-0.7	%	SABIC method
INJECTION MOLDING	2)
Drying Temperature		95-105	°C
Drying Time		3-4	Hrs
Drying Time (Cumulative)		8	Hrs
Maximum Moisture Content		0.02	%
Melt Temperature		265-295	°C
Nozzle Temperature		265-295	°C
Front - Zone 3 Temperature		255-295	°C
Middle - Zone 2 Temperature		245-290	°C
Rear - Zone 1 Temperature		230-280	°C
Mold Temperature		65-95	°C
Back Pressure		0.3-0.7	MPa
Screw Speed		20-100	rpm
Shot to Cylinder Size		30-70	%
Vent Depth		0.038-0.051	mm

为您推荐

供应商网> 特种塑料> NORYL EM6101 良好的性能保持/宽温度范围

在线问

产品参数

1/2

¥43.00 在线咨询