产品标题:ICS TRIPLEX 9832 控制板使用在哪里
型号:ICS TRIPLEX 9832
质保:七天验收期,质保期一年
品牌:ICS TRIPLEX
产品图片展示
产品详情资料:
测试模式硬件是可选的(有关选项,请参阅VMIC的价格指南),仅当VMIVME-4100与VMIVME-3100 12位ADC板(***要求)以及VMIVME-3000多路复用器板(可能)一起使用时才需要。这两个板都支持DAC板的内置测试功能,将在此处进一步解释。具有内置测试功能的典型数据采集配置如图3.4-1所示。最多16个多路复用器板或16个DAC板可以与一个VMIVME3100模数转换器(ADC)板互连。因此,单底盘系统可以容纳528个单端模拟输入或256个模拟输出。如果需要测试DAC板的模拟输出通道的精度,则需要VMIVME-3100 ADC板。这两块板必须存在于同一VMIC(P2)模拟背板中,VMIC具有低噪声模拟多路复用器总线背板(AMXbusTM)。AMXbusTM背板有5、9和19个插槽宽度可供选择,以适应不同的模拟I/O
产品英文详情资料:
The test mode hardware is optional (refer to VMIC’s Price Guide for options) and is only needed when the VMIVME-4100 is used along with the VMIVME-3100 12-bit ADC Board as a minimum and possibly the VMIVME-3200 Multiplexer Board. Both of these boards support the Built-in-Test capabilities of the DAC Board and will be further explained here. A typical data acquisition configuration with Built-in-Test capabilities is shown in Figure 3.4-1. Up to 16 multiplexer boards or 16 DAC Boards may be interconnected with one VMIVME3100 Analog-to-Digital Converter (ADC) Board. Thus, a single chassis system could accommodate 528 single-ended analog inputs or 256 analog outputs. If testing the accuracy of the analog output channels of the DAC Board is desired, then a VMIVME-3100 ADC Board is required. These two boards must exist in the same VMIC (P2) Analog Backplane, VMIC has a low-noise Analog Multiplexer Bus Backplane (AMXbusTM). The AMXbusTM Backplane is available in 5-, 9-, and 19-slot widths to accommodate different analog I/O sizing requirements.