NORYL EM6100 流动/热/冲击的良好尺寸稳定性
¥43.00
NORYL EM6101 良好的性能保持/宽温度范围
¥43.00
NORYL EM7301F 10%玻璃增强
¥43.00
NORYL EM7301HF 易流动，填充10%玻璃
¥43.00
NORYL EN185 挤出级
¥43.00
NORYL EN265 UL94 V-1级别
¥43.00
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS | |
|---|---|---|---|---|
| MECHANICAL | 1) | |||
| Tensile Stress, yield | 81 | MPa | SABIC - Japan Method | |
| Tensile Strain, break | 80 | % | SABIC - Japan Method | |
| Flexural Stress | 119 | MPa | ASTM D790 | |
| Flexural Modulus | 2800 | MPa | ASTM D790 | |
| IMPACT | 1) | |||
| Izod Impact, notched, 23°C | 31 | J/m | ASTM D256 | |
| THERMAL | 1) | |||
| HDT, 1.82 MPa, 6.4 mm, unannealed | 147 | °C | ASTM D648 | |
| CTE, -30°C to 30°C | 6.0E-05 | 1/°C | TMA | |
| PHYSICAL | 1) | |||
| Specific Gravity | 1.08 | - | ASTM D792 | |
| Water Absorption, (23°C/24hrs) | 0.07 | % | ASTM D570 | |
| Mold Shrinkage, flow, 3.2 mm | 2) | 0.5-0.7 | % | SABIC method |
| Melt Flow Rate, 300°C/5.0 kgf | 14.2 | g/10 min | ASTM D1238 |
在线问
