产品标题:1746-OV16伺服电机使用说明
型号:1746-OV16
质保:七天验收期,质保期一年
品牌:AB
产品图片展示
产品详情资料:
您可以使用SCXI-1350多机箱适配器将额外的SCXI-1001机箱连接到MIO-16板。使用多个SCXI-1350模块,最多可以将八个机箱连接到单个MIO板。SCXI-1350由多机箱适配器板组成。您还需要一根带状电缆用于每个机箱到机箱的连接,以及一条带状电缆用于从MIO板到***个机箱的连接。注意:连接多个机箱时,应使用0.5米带状电缆,以最小化电缆长度并保持信号完整性。您可以使用从MIO板到***个机箱的1.0米电缆。适配器板具有一个阳性后连接器、一个阴性前连接器和一个阳性机箱延长器连接器。您可以将后连接器连接到MIO板或先前机箱的带状电缆。您可以将前连接器与模块后信号连接器连接起来。将机箱扩展器连接器连接到连接到后续机箱的带状电缆。适配器从前连接器获取通道0,并将其发送到后连接器的通道0。适配器还将机箱扩展器连接器上的通道0到6分别映射到后连接器上的信道1到7。
产品英文详情资料:
You use the SCXI-1350 multichassis adapter to connect an additional SCXI-1001 chassis to the MIO-16 board. Using several SCXI-1350 modules, you can connect up to eight chassis to a single MIO board. The SCXI-1350 consists of a multichassis adapter board. You will also need a ribbon cable for each chassis-to-chassis connection, and a ribbon cable for the connection from the MIO board to the first chassis. Note: When connecting multiple chassis, you should use a 0.5 m ribbon cable to minimize cable length and maintain signal integrity. You can use a 1.0 m cable from the MIO board to the first chassis. The adapter board has a male rear connector, a female front connector, and a male chassis extender connector. You can attach the rear connector to a ribbon cable from the MIO board or a preceding chassis. You can connect the front connector with the module rear signal connector. You connect the chassis extender connector to a ribbon cable that goes to the subsequent chassis. The adapter takes channel 0 from the front connector and sends it to channel 0 of the rear connector. The adapter also takes channels 0 through 6 on the chassis extender connector and maps them to channels 1 through 7, respectively, on the rear connector.